This replacement inside door handle is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits the RH (Passenger Side) FRONT or REAR
  • Injection molded Black handle
  • Direct replacement
  • Built to strict quality control standards
  • Fits 4 Door Sedan or Station Wagon models

This inside door handle is a great replacement and has good cost savings over the dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:34)
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Pry off the trim piece inside the door pull with a flat blade screwdriver
    • Remove the T20 Torx screws from the side and bottom of the panel
    • Remove the T20 Torx screw inside the door handle
    • Pry off the trim piece around the door handle
    • Disconnect the wiring harness from the window switch
    • Pry off the triangle panel in the corner with a flat blade screwdriver
    • Remove the 6 1/4 mm bolts from the door pull
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
  2. step : Removing the Door Handle (2:46)
    • Pull off the door handle
    • Put the lock switch into the lock position
    • Pull the latch cable out of the door handle
  3. step : Installing the Door Handle (3:15)
    • Put the lock switch into the lock position
    • Connect the latch cable to the door handle
    • Slide the door handle into place using the locating tabs
  4. step : Reinstalling the Door Panel (3:35)
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert and tighten the T20 Torx screws from the side and bottom of the panel
    • Insert and tighten the T20 Torx screw inside the door handle
    • Insert and tighten the 6 1/4 mm bolts from the door pull
    • Push in the trim piece inside the door handle
    • Push in the trim piece inside the door pull
    • Push in the triangle panel in the corner

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2007 Ford Focus Front or Rear Interior Door Handle Passenger Side

This part replaces:

  • OE # 6S4Z5422600A
  • Dorman 80634
Part #: 1ADHI00374

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(06:00 min)