Replaces

2000-07 Chevy Monte Carlo Mirror Driver Side - 1AMRE01260

This replacement mirror is just what you need to get your vehicle in good working condition again!

Mirror specifications:

  • Fits LH Driver side
  • Replaces dealer part number: 10319386
  • Power heated mirror
  • Injection molded black plastic housing
  • Can be painted by the buyer to any color desired or installed as is
  • Direct replacement
  • Built to strict quality control standards

This mirror makes a great replacement and has good cost savings over a dealer part.

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed, the mirror may not function properly.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:55)
    • Remove the two Phillips screws in the door panel.
    • Remove the two T27 torx bolts.
    • Pull out on the door handle bezel.
    • Disconnect the switch from the bezel.
    • Use a putty knife and rag to pry out the clips around the door panel.
    • Lift up and pull the panel out.
    • Disconnect the harnesses from the door panel.
  2. step : Removing the Side Mirror (3:42)
    • Disconnect the mirror harness.
    • Remove the insulation pad.
    • Remove the three 10mm nuts securing the mirror.
    • Pull the mirror out and off.
  3. step : Replacing the Side Mirror (4:33)
    • Feed the mirror harness down into the door.
    • Line up the mirror and press it into place.
    • Replace the top nut first then the other two 10mm nuts.
    • Replace the insulation pad.
    • Reconnect the mirror harness.
  4. step : Replacing the Door Panel (6:05)
    • Reconnect the harnesses on the door panel.
    • Line up the door panel and push it into place. Hit around the edges to activate the clips.
    • Replace the switch in the bezel.
    • Replace the bezel behind the door handle.
    • Reinsert the two T27 torx bolts.
    • Reinsert the two Phillips screws.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Paper Towels

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T27 Torx Driver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
04 Monte Carlo
It arrived ahead of the promise date, which is always a plus. The video you had on line for installing the mirror was a plus also. My husband had little trouble taking off the broken one and replacing it with the new one. You would never know that it was run into by a deer. Thanks!
February 6, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(07:03 min)

Tools List:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Paper Towels

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T27 Torx Driver



This part replaces:

  • Partslink GM1320273
  • Hollander 128-02958L
  • OE # 10319386 10352936
  • DEPO 335-5439L3EBH

Vehicle Fit

  • 2000-2007 Chevy Monte Carlo Heated Power Mirror Driver Side
Part #: 1AMRE01260

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More