Replaces

2000-06 Toyota Tundra Shock Absorber Rear TRQ SBA60617 - 1ASHA00132

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Front or Rear Location:   Rear

Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

To ensure the vehicle performs safely and as designed, we recommend replacing shocks & struts in pairs. If the damping rates are significantly different from side to side (like using different brand parts or mixing old with new) the vehicle body and wheel movement variations could cause handling irregularities. We also recommend performing an alignment after replacement. This will ensure proper tracking and protect your vehicle's tires from premature wear.

Direct Fit

Fits and functions correctly.  Competitors combine applications to reduce the amount of parts they carry, resulting in: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Rear Shocks (0:36)
    • Remove the 14mm nut from the top of the shock
    • Counterhold the lower 17mm nut with a 17mm wrench and remove the nut with a 17mm socket and ratchet
  2. step : Installing the Rear Shocks (2:44)
    • Compress the shock three times
    • Remove the top nut, washer, and one bushing
    • Insert the shock into place
    • Place the bushing, washer, and top nut on
    • Tighten the top 14mm nut
    • Torque the top 14mm nut to 15 foot-pounds
    • Jack up from underneath the rear differential to align the shock into place
    • Tighten the lower 17mm nut with a 17mm wrench and a 17mm socket and ratchet
    • Torque the lower nut to 64 foot-pounds

Tools needed for replacement:

    General Tools

  • Floor Jack

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2006Toyota Tundra Toyota Tundra 4 Wheel Drive Rear Shock Absorber Driver or Passenger Side TRQ SBA60617
Part #: 1ASHA00132


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: SBA60617

How-to Video:

(06:18 min)