2000-06 Nissan Sentra Window Regulator - 1AWRG01125

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power

This replacement power window regulator with motor is just what you need to get your vehicle in good shape again!


  • RH (Passenger Side) REAR DOOR
  • Power operation
  • Replaces dealer part numbers: 82700-4Z310, 82720-5M000, 82730-5M000, 827004Z310, 827205M000, 827305M000
  • Includes the power window motor
    • Motor has square connector
  • Direct replacement
  • Built to strict quality control standards
  • Does NOT fit Mexican Built Models

This power window regulator with motor makes a great replacement and has good cost savings over a dealer unit.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:47)
    • Remove the clip on the side of the panel by turning lightly with a Phillips head
    • Pry up the window switch panel by hand
    • Disconnect the window switch wiring harness
    • Remove the door handle bezel with a flat blade screwdriver
    • Remove the Phillips screws from the door pull with a 10mm socket
    • Pull the door panel off
    • Lift the door panel up and off
    • Carefully peel off the water shield with a putty knife
  2. step : Removing the Window Regulator (3:50)
    • Remove the two 10mm bolts from the regulator brace
    • Disconnect the window motor lead
    • Remove the four 10mm bolts from the regulator
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Pull the window regulator out through the door
    • Lower the window by hand
  3. step : Separating the Window Motor from the Regulator (6:30)
    • Remove the two T20 Torx screws from the window motor
    • Pull the motor away from the regulator
  4. step : Reinstalling the Motor (8:00)
    • Put the motor onto the bracket
    • Insert the two T20 bolts into the motor
    • Connect the window switch wiring harness
    • Connect the window motor to the lead
    • Turn the vehicle on
    • Run the motor up for 4 seconds
    • Disconnect the window motor lead
  5. step : Reinstalling the Regulator (9:20)
    • Raise the window
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the four 10mm bolts into the regulator
    • Lower the window onto the regulator
    • Insert the two 10mm bolts into the window track
    • Connect the window motor lead
    • Remove the two 10mm bolts from the regulator brace
  6. step : Reinstalling the Door Panel (12:09)
    • Put the water shield into place
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips screws to the door pull
    • Connect the window switch wiring harness
    • Connect the window switch panel
    • Connect the door handle bezel
    • Re-clip the clip on the side of the panel

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T20 Torx Driver

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2006Nissan Sentra Nissan Sentra (excluding Mexico Built Models) Rear Power Window Regulator with Motor Passenger Side
Part #: 1AWRG01125

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(14:44 min)