Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power

This replacement power window regulator with motor is just what you need to get your vehicle in good shape again!

Specifications:

  • LH (Driver Side) REAR DOOR
  • Power operation
  • Replaces dealer part numbers: 82701-4Z310, 82721-5M000, 82731-5M000, 827014Z310, 827215M000, 827315M000
  • Includes the power window motor
    • Motor has square connector
  • Direct replacement
  • Built to strict quality control standards
  • Does NOT fit Mexican Built Models

This power window regulator with motor makes a great replacement and has good cost savings over a dealer unit.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:47)
    • Remove the clip on the side of the panel by turning lightly with a Phillips head
    • Pry up the window switch panel by hand
    • Disconnect the window switch wiring harness
    • Remove the door handle bezel with a flat blade screwdriver
    • Remove the Phillips screws from the door pull with a 10mm socket
    • Pull the door panel off
    • Lift the door panel up and off
    • Carefully peel off the water shield with a putty knife
  2. step : Removing the Window Regulator (3:50)
    • Remove the two 10mm bolts from the regulator brace
    • Disconnect the window motor lead
    • Remove the four 10mm bolts from the regulator
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Pull the window regulator out through the door
    • Lower the window by hand
  3. step : Separating the Window Motor from the Regulator (6:30)
    • Remove the two T20 Torx screws from the window motor
    • Pull the motor away from the regulator
  4. step : Reinstalling the Motor (8:00)
    • Put the motor onto the bracket
    • Insert the two T20 bolts into the motor
    • Connect the window switch wiring harness
    • Connect the window motor to the lead
    • Turn the vehicle on
    • Run the motor up for 4 seconds
    • Disconnect the window motor lead
  5. step : Reinstalling the Regulator (9:20)
    • Raise the window
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the four 10mm bolts into the regulator
    • Lower the window onto the regulator
    • Insert the two 10mm bolts into the window track
    • Connect the window motor lead
    • Remove the two 10mm bolts from the regulator brace
  6. step : Reinstalling the Door Panel (12:09)
    • Put the water shield into place
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips screws to the door pull
    • Connect the window switch wiring harness
    • Connect the window switch panel
    • Connect the door handle bezel
    • Re-clip the clip on the side of the panel

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T20 Torx Driver

  • Wrenches - Metric

  • 10mm Wrench

5.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
Perfect fit
This was for my daughters car who lives out of town. She described that the window was falling down, but she also could not hear any motor noise. I was unsure if I would need the motor or not. Since most of the 2006 Sentra were made in Mexico, the description said the unit with the motor would not fit the Mexico model. The only difference is the electrical plug. The OEM is motor plug is made into the motor housing. This one has a cord. It is very easy to cut the plugs off and attach the 2 wires directly with butt splices, or any other connector you choose. Since this is a DC motor the polarity does matter. If the window goes up when it should go down, just reverse the 2 wires. The quality was good and the changeout was a breeze. The video was very helpful.
January 26, 2017
Fast, easy service.
The part was in stock. The price was very good. It shipped out quickly. Email communications were timely, including an installation video. Couldnt be happier.
June 30, 2017
Great service
Great experience purchasing from 1A Auto. I found the part I needed easily and it came quite quickly. Using a YouTube video from 1A Auto, I was able to install the part in under an hour, despite the fact that I know nothing about cars. I found the price to be reasonable as well. My window works great now.
October 27, 2017
It just works!
The installation was easy and straightforward, as shown in the video. The only small caveat was the size and polarity of the connector. Since the connector was so big, I just had to turn it 180 degrees to flip the polarity and then tape it up. Also in my case, the screw threads in my window were damaged, so had to drill them out and replace. If the package included spare screws, that would have been a huge bonus.
November 28, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2006Nissan Sentra Nissan Sentra (excluding Mexico Built Models) Rear Power Window Regulator with Motor Driver Side
Part #: 1AWRG01124


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(14:44 min)