This replacement Nissan Sentra mirror is just what you need to get your Nissan in good looking form again!

Specifications:

  • LH (Driver Side)
  • Manual Remote Operation - Moves from joystick
  • Injected molded black plastic housing
    • Can be painted to any color desired or installed as is
  • Sail mount design - Mounts in the corner of the door
  • Direct replacement
  • Built to strict quality control standards
  • Non-Folding

We have noticed that there are many inferior quality mirrors on the market. We have researched other mirror manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket mirrors available. So don't be fooled by cheaper made imitation mirrors. Go with superior quality!

This Nissan Sentra mirror makes a great replacement and has substantial cost savings over a dealer unit.

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed in specifications, the mirror may not function properly.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:46)
    • Pry up the pull cup panel.
    • Pry up the switch panel.
    • Disconnect the harness from the switch panel.
    • Remove the two 10mm Phillips bolts.
    • Remove the Phillips screw at the inside edge of the door panel.
    • Remove the Phillips screw at the bottom of the door panel.
    • Pry out the bezel behind the door handle.
    • Pull the door handle out, up and off.
  2. step : Removing the Side Mirror (3:04)
    • Pry the triangular panel from the door.
    • Disconnect the mirror harness.
    • Remove the three 10mm nuts.
    • Pull the mirror out and off.
  3. step : Replacing the Side Mirror (4:20)
    • Put the harness down through the door.
    • Line up the mirror and push it into place.
    • Replace the three 10mm nuts.
    • Reconnect the mirror harness.
    • Push the triangular panel back into place.
  4. step : Replacing the Door Panel (5:50)
    • Line up the door panel and pull the harness through the panel.
    • Push the clips in around the panel.
    • Replace the two 10mm Phillips bolts.
    • Replace the Phillips clips along the outside of the door panel.
    • Put the door handle bezel back into place.
    • Reconnect the switch panel and push it down into place front first.
    • Replace the door pull cup.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2006 Nissan Sentra Manual Mirror Driver Side

This part replaces:

  • Partslink NI1320134
  • OE # 963025M100
  • DEPO 315-5406L3CD
Part #: 1AMRE00350

How-to Video:

(08:17 min)