Replaces

2000-05 Toyota Tundra Fog / Driving Light - 1ALFL00021

This is a Toyota Tundra Fog Light Driving Lamp. In general the bulb itself is not included.

Specifications:

  • Fits the LH (Driver Side)
  • Includes lens, housing, and mounting bracket
  • Direct replacement fog light
  • (DOT) Department of Transportation and (SAE) Society of Automobile Engineers approved
  • Fits models with Oval fog lights
    • Does not fit models with Round fog lights

This Toyota Tundra fog light makes a great replacement and provides a good value.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Replacing the Fog Light Bulb (0:31)
    • This step is for if you are replacing the bulb alone
    • Twist the bulb base counterclockwise
    • Pull the bulb out of the fog light
    • Release the bulb from its base by squeezing the tab
    • Push the new bulb onto the base
    • Insert the bulb into the fog light
    • Turn the bulb base clockwise
  2. step : Removing the Fog Light (1:14)
    • Disconnect the fog light lead
    • Remove the three 10mm nuts from the fog light bracket
    • Pull off the fog light
  3. step : Installing the New Fog Light (3:05)
    • Push the fog light into place, aligning the bracket onto the three studs
    • Start the 10mm nuts by hand
    • Tighten the 10mm nuts
    • Reconnect the fog light lead

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2005 Toyota Tundra Fog / Driving Light Driver Side

This part replaces:

  • OE # 812200C010
  • Partslink TO2592102
  • Hollander 116-59287L
  • TYC 19-5336-00
  • DEPO 312-2006L-AF
Part #: 1ALFL00021

How-to Video:

(04:47 min)