Replaces

2000-05 Nissan Sentra Window Regulator Pair - 1AWRK00485

These replacement window regulators are just what you need to get your vehicle in good shape again!

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT DOORS
  • Power operation
  • Replaces dealer part numbers: 80720-4M400, 80721-4M400, 80730-4Z305, 80731-4Z305, 82730-3Z005, 82731-3Z005, 807214M400, 807314Z305, 827313Z005, 807204M400, 807304Z305, 827303Z005
  • Include the power window motors
  • Direct replacements
  • Built to strict quality control standards

These window regulators make good replacements and have good cost savings over the dealer units.

Please Note: These window regulators are high quality aftermarket parts that meets or exceeds the performance of the original. They have been subjected to extensive testing and quality control standards. That is why we offer these regulators with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle if this window regulator does not fit the application stated.
  • This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Part Details

  • Operation: Power
  • Quantity: Pair
  • Regulator Option: with Motor

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:52)
    • Lift up the door pull by hand
    • Remove the door pull panel
    • Pry up the window switch panel by hand
    • Disconnect the window switch wiring harnesses
    • Remove the Phillips head screws inside the door pull
    • Remove the two Phillips screws along the door panel
    • Pry off the door handle bezel with a flat blade screwdriver
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Carefully peel off the water shield
  2. step : Removing the Window Regulator (3:50)
    • Raise the window by hand
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Lift the window up and out
    • Disconnect the window motor lead
    • Remove the three 10mm bolts from the motor
    • Remove the four 10mm bolts from the regulator
    • Pull the window regulator out through the door
  3. step : Installing the New Window Regulator (6:34)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the four 10mm bolts into the regulator
    • Insert the three 10mm bolts into the window motor
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
  4. step : Resetting the Motor (9:02)
    • Connect the window switch wiring harness
    • Connect the window motor to the lead
    • Turn the vehicle on
    • Run the motor up for 4 seconds
    • Disconnect the window motor lead
    • Disconnect the window switch wiring harness
  5. step : Reinstalling the Door Panel (9:08)
    • Put the water shield into place
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips head screws inside the door pull
    • Insert the two Phillips screws along the door panel
    • Push on the door handle bezel
    • Connect the window switch wiring harnesses
    • Push on the window switch panel by hand
    • Push on the door pull by hand

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2000-2005Nissan Sentra Nissan Sentra Front Power Window Regulator with Motor Pair
Part #: 1AWRK00485


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:53 min)