Specifications:
  • RH (Passenger Side)
  • Includes lens, housing, and mounting panel
  • Includes integrated parking/marker lamp
  • Replaces dealer part number: 1F4Z-13008-BA, 1F4Z13008BA
  • Bulbs not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Removing the Headlights (1:26)
    • Pull up on the tabs on the back of the headlight. Remove the tabs.
    • Remove the 8mm bolt on the headlight.
    • Pull the headlight forward.
    • Disconnect the wiring harness.
  2. step : Changing the Headlight Bulbs (2:32)
    • Parking bulb twist counter clockwise. Pull the bulb free from the socket and replace. Twist clockwise to lock.
    • Turn the cap on the headlight counter clockwise. Pull the connector free. Twist the ring counterclockwise. Pull the headlight free. Reverse procedure to reinstall.
  3. step : Replacing the Headlight (3:50)
    • Remove the two screws on the back of the old headlight, that secures the harness.
    • Remove the harness.
    • Connect the harness to the new headlight assembly.
    • Plug the harness into the headlight.
    • Line the light up and push into place Outside first.
    • Replace the clips.
    • Replace the 8mm bolt.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2000-2005Mercury Sable Mercury Sable Headlight Passenger Side

This part replaces:

  • Partslink FO2503168
  • Hollander 114-578R
  • TYC 20-5857-00-1
  • DEPO 331-1176R-AS
  • OE # 1F4Z 13008 BA
Part #: 1ALHL00162


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:06 min)