2000-05 Ford Taurus Mercury Sable Heater Hose & Tube Assembly (Inlet & Outlet) Dorman 626-207 - 1AHCX00272

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit


  • Replaces dealer part numbers: YF1Z18B402AA, YF1Z 18B402 AA
  • Direct replacement
  • Built to strict quality control standards
  • Includes supply & return hoses
  • Correct for models with V6 3.0L (Vin U, 1, & 2)


Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Carbon black and Bisphenol A (BPA), which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Remove the old heater hose assembly (1:15)
    • Unbolt the heater hose assembly using your 10 mm socket and ratchet.
    • Disconnect the hose hook ups.
    • Raise and secure the car to unclamp the hose hook ups using a pair of bent nose pliers.
    • Use your utility knife to remove the hoses if necessary.
    • Pull the hose assembly up and out.
  2. step : Install the heater hose assembly (8:20)
    • Slide the hose assembly into place
    • Start connecting the hose hook ups and clipping down the clamps.
    • Bolt the assembly in with your socket and ratchet.

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Bent Nose Pliers
  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

5.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
I wish I would have call before ordering a part next time I will call to make sure I get the right part
May 27, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2005Ford Taurus Ford Taurus V6 3.0L (8th Vin Digit 1, 2, or U) Heater Hose & Tube Assembly (Inlet & Outlet)
2000-2005Mercury Sable Mercury Sable V6 3.0L (8th Vin Digit 1, 2, or U) Heater Hose & Tube Assembly (Inlet & Outlet)
Only 2 left in stock
Part 1AHCX00272
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: 626-207