This axle shaft is a new, aftermarket part. It is just what you need to get your vehicle in good working order!


  • Fits RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 26077126, 88955447
  • Brand New, not refurbished or rebuilt
  • Built to strict quality control standards
  • No core charge
  • Only fits Manual Transmission Models & with or without ABS


CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (1:15)
    • Loosen the lug nuts and hub nut.
    • Raise and secure the vehicle
    • Remove the lug nuts and the wheel.
    • Remove the hub nut.
  2. step : Remove the axle (1:45)
    • Use a hammer to break the axle loose.
    • Unbolt the steering knuckle.
    • Push your axle through and out.
    • Use a pry bar to pry out the axle from the transmission.
    • Put a catch pan underneath to catch the transmission fluid.
    • Take care not to damage the seal in the transmission.
  3. step : Install the new axle (4:30)
    • Put the axle into place, snugging it into the transmission.
    • Work the outward end of the axle into the steering knuckle assembly.
    • Once you work the axle back into the hub.
    • Bolt back together the steering knuckle.
    • Replace the washer and hub nut.
    • Torque the steering knuckle bolts to 95 ft lbs
    • Place the wheel and lug nuts back on.
    • Lower the vehicle.
    • Torque the hub nut to 144 ft lbs
    • Using a star pattern, torque the lug nuts to 75 ft lbs.
  4. step : Top off your transmission fluid (8:20)
    • Check the transmission dip stick to determine how much fluid needs to be added.
    • Use a 2ft hose and attach it to the bottle of transmission fluid and let it drain into the transmission.
    • Do not squeeze or force the fluid in.

Tools needed for replacement:

    General Tools

  • Hammer

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • Complete Metric Socket Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2005 Chevy Cavalier CV Axle Shaft Passenger Side for Models with Manual Transmission
  • 2000-2005 Pontiac Sunfire CV Axle Shaft Passenger Side for Models with Manual Transmission
Part #: 1AACV00033

Order must be placed by 4pm ET

How-to Video:

(09:56 min)