Replaces

2000-05 Chevy Monte Carlo Power Window Switch - 1AWES00048

This replacement 2 button power window switch is just what you need to get the power windows working again in your Chevy Monte Carlo.

Specifications

  • Driver Side
  • 2 button design
  • Built to strict quality control standards
  • Direct replacement

 

Replace your broken window switch now with this great fitting alternative. It makes a great replacement and has substantial cost savings over a dealer unit.

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:59)
    • Remove the Phillips head screw from inside the door handle
    • Remove the Phillips screw from the mirror base trim panel
    • Remove the two T27 Torx screws from below the door pull
    • Pull the door handle bezel off by hand
    • Disconnect the lock switch wiring harness with a flat blade screwdriver
    • Wrap a cloth rag around a putty knife to avoid scratching your paint
    • Pry the door panel off with the putty knife
    • Lift the door panel up and off
    • Disconnect the window switch wiring harnesses with a flat blade screwdriver
  2. step : Removing the Window Switch (3:28)
    • Remove the three Phillips screws from the switch panel backing plate
    • Remove the backing plate
    • Remove the Phillips screw from the lower door pull bezel
    • Pull out the lower door pull bezel
    • Push the switch panel out of the door panel from the back side
    • Loosen the thumb taps on the switch panel
    • Pull the window switch out of the switch panel
  3. step : Installing the New Window Switch (6:10)
    • Push the window switch into the switch panel
    • Push the switch panel into the door panel
    • Put the lower door pull bezel into place
    • Insert the Phillips screw into the lower door pull bezel
    • Put the backing plate into place
    • Insert the three Phillips screws into the backing plate
  4. step : Installing the New Door Panel (8:25)
    • Connect the window switch wiring harnesses
    • Connect the lock switch wiring harness
    • Put the door panel into place
    • Push in the door panel clips
    • Push on the door handle bezel
    • Push on the mirror base trim panel
    • Insert the Phillips screw into the mirror base panel
    • Insert the two T27 Torx screws below the door pull
    • Insert the Phillips screw into the door handle
    • For more detailed instructions, please see the 2003 Malibu door panel replacement video

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Torx Drivers & Sockets

  • T27 Torx Driver

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Power Window Switch
Delivered on time with no issues. Perfect fit for my 2000 monte carlo ss. Watched the video they had and it was alot of help. Easy step by step process.
August 16, 2018
Purchased
1 month ago
Perfect
Installed power window switch that I purchased from 1A. Used their video. Everything works perfect. Saved lots of money!
February 11, 2018
Purchased
6 months ago
Window switch
Working great video really helped will buy parts again whin i can
January 23, 2018
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2000-2005Chevy Monte Carlo Chevy Monte Carlo Power Window Switch Driver Side

This part replaces:

  • OE # 10284860
  • Dorman 901-031
  • Standard Motor Products DS-1450
Part #: 1AWES00048


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:38 min)