Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Fits RH (Passenger Side)
  • Replaces dealer part number: 10349959
  • Includes lens & housing
  • Bulbs not included
This headlight is a great replacement and has good cost savings over a headlight from the dealer.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

    Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb. Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.

  1. step : To replace just the headlight bulbs (1:00)
    • Pop the hood and secure it.
    • Reach behind the headlight assembly.
    • Pull aside the rubber boot and unclip the retaining wire.
    • Remove and replace the bulb.
    • Anchor it with the retaining wire and seal it in with the rubber boot.
  2. step : Replace the headlight assembly (1:20)
    • Pull up on the two anchor tabs securing the assembly.
    • Pull out the headlight assembly and unplug the wiring harness.
    • Remove the rubber seals to access the bulbs if needed.
  3. step : Install the new headlight assembly. (3:00)
    • Plug in the wiring harness.
    • Secure with the anchor tabs.
  4. When adjusting headlights, the concentration of the beam should be an inch below the height of the low beams at a 20ft distance and the high beams should be level with the height of the high beams at a 20ft distance.

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Head Light
The head light works great. Looks just like the OEM that I had to replace. I have this feeling that I will have to replace more head lights because it was a deer that took the light out. There is a lot of Deer in our area. Thanks to 1A Auto , it was a good price and free shipping
January 25, 2017
A very great experience
I ordered front headlights and window regulator for my car very impressed with the service and parts that fit just right for my car no complaints here will continue shopping with 1aauto.com for low price parts and great service that I cant get from the auto parts store
May 6, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2005Chevy Monte Carlo Chevy Monte Carlo Headlight Passenger Side
Part #: 1ALHL00859


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:59 min)