Replaces

2000-05 Chevy Monte Carlo Fuel Tank Filler Neck - 1AFMX00134

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement fuel filler neck is just what you need to get your vehicle in good working order again!

Specifications:

  • Fits between outer 1/4 panel and filler hose
  • Configuration:
    • Main filler tube
    • Length - 26"
    • Tube O.D. - 1 1/4"
  • Replaces dealer part numbers: 10445234
  • Built to strict quality control standards
  • Replaces any gas tank filler neck that is rusted, rotted, bent, or damaged from an accident

Note: If there is any question about this filler neck fitting your vehicle, please ask your local dealer if the above OE numbers will fit your application.

This fuel filler neck is a great replacement and has good cost savings over a gas tank filler neck from the dealer.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Fuel Filler Neck (0:40)
    • Open the fuel door
    • Remove the gas cap
    • Remove the three 7mm bolts around the gas filler neck
    • Raise the vehicle on jack stands
    • Remove the 10mm bolt from the bracket
    • Remove clamp from the gas hose with a flat blade screwdriver
    • Pry the hose free while pulling the fuel filler neck free without damaging the hose
    • Pull the filler neck down and out
  2. step : Installing the New Filler Neck (2:36)
    • Feed the new filler neck into place
    • Place the hose into place and line it up
    • Replace the 10mm bolt to the bracket without tightening the entire way
    • Replace and tighten the three 7mm bolts around the filler neck
    • Replace the gas cap
    • Close the fuel door
    • Tighten the 10mm bolt
    • Tighten the hose clamp with a flat blade screwdriver

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 7mm Socket
  • 8mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2005Chevy Monte Carlo Chevy Monte Carlo Fuel Tank Filler Neck
Part #: 1AFMX00134


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:23 min)