Replaces

2000-05 Chevy Impala Window Regulator Pair - 1AWRK00063

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Quantity:   Pair
  • Operation:   Power

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part numbers: 10338857, 88987651, 10338856, 88987652
  • Assemblies include motors and regulators
  • 100% tested prior to leaving the factory

Please Note: These window regulators are high quality aftermarket parts that meets or exceeds the performance of the original. They have been subjected to extensive testing and quality control standards. That is why we offer these regulators with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle if this window regulator does not fit the application stated.
  • This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:03)
    • Remove the Phillips head screw inside the door handle
    • Remove the two T30 Torx screws inside the door pull
    • Pry off the window switch panel
    • Pry off the door handle bezel
    • Disconnect the window switch wiring harness
    • Remove the two T30 Torx screws behind the door pull
    • Pry off the window trim panel
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
  2. step : Removing the Window Regulator (3:40)
    • Remove the three 10mm bolts from the regulator
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Remove the three 10mm bolts from the window motor
    • Disconnect the window motor lead
    • Pull the window regulator out through the door
  3. step : Reinstalling the Regulator (7:46)
    • Transfer the motor to the new regulator
    • Push the regulator into the door
    • Hang the regulator by its motor bolts
    • Connect the window motor lead
    • Insert the three 10mm bolts into the regulator
    • Insert the three 10mm bolts into the window motor
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
  4. step : Reinstalling the Door Panel (10:57)
    • Make sure the insulation is in place
    • Lift the door panel into place, using the locating pins
    • Push in the door panel clips
    • Push on the window trim piece
    • Insert the two T30 Torx screws behind the door pull
    • Push on the door handle bezel
    • Insert the Phillips head screw inside the door handle
    • Connect the window switch wiring harness
    • Push the switch panel into place
    • Insert the two T30 Torx screws inside the door pull

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Torx Drivers & Sockets

  • T30 Torx Driver

4.50/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
1
0
0
The parts fit and worked properly! Also removal and installation was very easy thanks to the video! Im very happy!
June 23, 2017
TThe parts were good perfect fit and the price was great. The only problem I have is there packing they do not do a good job packing there stuff for shipping no packing material just the parts in a box. Not professional
August 2, 2017
Window Motors
They work great and are easy to install. They were an exact fit. I have ordered two or three parts from 1A Auto and have not yet had any issues wheres them working properly or fitting properly. Im glad that I have found a great Part Source like 1A Auto. I will continue to buy my parts from 1A Auto and will highly recommend them two other people. I am 100% satisfied with 1A Auto.
May 14, 2018
All of the items purchased over the years from 1A have always been very high quality and the perfect fit. Also the clips posted on utube are very instructive for the repairs. Win win can do the fix the first time and get it rite. Thanks
July 28, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2005Chevy Impala Chevy Impala Rear Power Window Regulator with Motor Pair
Part #: 1AWRK00063


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(12:55 min)