Replaces

2000-05 Chevy Impala Monte Carlo Combination Switch - 1AZCC00143

This combination cruise control, wiper, high beam and turn signal switch lever is a new, aftermarket replacement part. It is designed to REPLACE original units that are prone to failure. It's just what you need to get your vehicle in good working order again!

Specifications:

  • Replaces dealer part number(s): 26085930, 26093873, 88964580
  • Direct replacement
  • Design improved for more durability
  • Detailed graphics
  • Built to strict quality control standards
  • Correct for models:
    • That DO have on/off cruise control function on turn signal lever

This combination lever is designed to replace your original with no modifications necessary.

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

4.8 / 5.0
25 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
22
2
1
0
0
my purchase
as always fast free shipping and the product works perfectly Im very pleased with my purchase
July 17, 2018
Purchased
3 weeks ago
Works well and as always great customer service
I have ordered many products from 1a auto and never disappointed
June 13, 2018
Purchased
1 month ago
Worked great
I was exactly what I ordered. The lettering was nice and bright. Would recommend.
May 21, 2018
Purchased
2 months ago
Worked Well Great Fit
A few tips based on my 2000 plain Jane Impala WITH cruise Control:
1) Watch the video
2) The video shows the use of a crescent wrench on the one Torx driver for the screw behind the wheel. I turned the wheel and was able to use a Torx bit in a screwdriver... much easier.
3) To get to the two wire connector, it was easier to remove the steel knee shield under the column by removing the 4 bolts.
4) There was a green locking tab I needed to push towards the engine on one of the connectors.
5) I had to remove that one panel that goes all the way across the dash in order to get the top wheel column cover off (PITA).
6) Your vehicle may vary... Have fun!
May 10, 2018
Purchased
3 months ago
Right parts fast shipping
The parts I ordered we exactly what I needed and OEM spec's easy to install. I will be ordering from 1a auto in the near future. I highly recommend 1a auto to anyone needing OEM parts.. I will recommend them to all my friends. Keep up the good work and service you do..
May 8, 2018
Purchased
3 months ago
Blinker not working
I had one of these put in at a repair shop that I deal with, it lasted about 5 months and cost me $280.00 for the switch and $75.00 to install it. After watching there video I bought the switch from A1 and installed it myself. It took less than a hour to replace, works great. Thanks A1 Auto
April 12, 2018
Purchased
3 months ago
greatr service and very nice peppole
have not installed it yet but i am sure it will be ok just want to say i had to talk to costrmer service could not ask for better service and very nice and heipful people thank you so much i will be buying more from you
March 15, 2018
Purchased
4 months ago
correct part
after buying one on ebay only to find it wasn't wired correctly and getting the runaround I found this site with their video and now have a functional switch.
January 25, 2018
Purchased
6 months ago
Works great!
Came shipped in a nice box with bubble wrap! Put it in and zero weather works great came into daysWrite your review here. It must be at least 50 characters long. Consider whether you would recommend this product and what you like or dislike about it.
January 22, 2018
Purchased
6 months ago
2003 Monte Carlo Multi function switch
This item was in brand new condition when I got it and was easy to install, given you use the accompanying video from 1A Auto.

I now no longer have to worry about only having my brights and have my low beams again. Plus i can now control the cruise control via my steering wheel or the multi function switch (turn signal/high beam/ cruise).
Thank you 1A AUTO!!!!!
January 14, 2018
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 9 answers
I cant seem where to find where the green and briwn wire goes
plugged on my 2004 impala?
Russell C on Mar 20, 2018
BEST ANSWER: Do you have cruise control on your car? I think that is likely what the brown and green wire goes to. I am sorry that it is so long ago that I did this that I don't remember where that connected, but as I recall, I just reconnected the same place that it connected when it came out which is how I found it. I think that I had the opposite problem from what you probably have. I originally bought the assembly that did not have cruise control and I needed it, so I had to do the whole job all over again with the right part later! I suspect you will be fine just not connecting the two wires if you don't have cruise control.
Really dont see anywere it goes plugged i have the two plugged but the third brown n green i dont see anywhere. The malfunction switch for a 2004 imapla any answers?
Russell C on Mar 20, 2018
BEST ANSWER: See my post dated May 10, 2018: A few tips based on my 2000 plain Jane Impala WITH cruise Control:
1) Watch the video
2) The video shows the use of a crescent wrench on the one Torx driver for the screw behind the wheel. I turned the wheel and was able to use a Torx bit in a screwdriver... much easier.
3) To get to the two wire connector, it was easier to remove the steel knee shield under the column by removing the 4 bolts.
4) There was a green locking tab I needed to push towards the engine on one of the connectors.
5) I had to remove that one panel that goes all the way across the dash in order to get the top wheel column cover off (PITA).
6) Your vehicle may vary... Have fun!
i have a 2001 chevy impala 3.8 v6 police edition but it was an undercover so its basically the ls model, my current lever does not have a cruise control switch on it but on my dash next to the speedometer there is a light that says cruise so am i able to install this and be able to use cruise control?
johnn on Jan 4, 2018
BEST ANSWER: Thanks for the question! even 'an undercover' police model is a police model, so you will want to purchase parts based on that. This lever is not meant to add the cruise option to your vehicle. Instead it only replaces the lever on vehicles that had cruise from the factory. Thank you!
how to install this part ?
Tony M on Feb 20, 2017
BEST ANSWER: We do not currently have any installation instructions or videos for this specific part. You may want to check a Haynes repair manual which we have available on our website, here: http://www.1aauto.com/1A/auto-repair-manuals. Searching an online automotive forum specific to your vehicle may help as well. Many people like posting their own repairs online and someone may have done a repair similar to yours. Please let us know if you have any further questions.

Vehicle Fit

  • 2000-2005 Chevy Impala with Cruise Control Combination Switch
  • 2000-2005 Chevy Monte Carlo with Cruise Control Combination Switch

This part replaces:

  • OE # 26085930
  • OE # 26093873
  • OE # 88964580
  • Hollander 629-00336
  • Standard Motor Products DS-941
Part #: 1AZCC00143