This replacement window regulator is just what you need to get your vehicle in good working form again!

Specifications:

  • RH (Passenger Side) REAR
  • Power operation
  • Replaces dealer part number: 25750518
  • Does NOT include the power window motor
  • 100% tested prior to leaving the factory
  • Direct replacement
  • Built to strict quality control standards
  • Fits models with Kamco Motor only (Black in color)
    • Does NOT fit models with Valeo Motor (Silver in color)

This window regulator makes a great replacement and has good cost savings over the dealer part.

Please Note:  This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this window regulator does not fit the application stated.
    •  This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.
Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Part Details

  • Operation: Power
  • Regulator Option: without Motor

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (1:00)
    • Pry off the door latch bezel
    • Remove the Phillips screw hiding behind it.
    • Use a putty knife and a cloth rag to pry up and unclip the door panel
    • Unplug the wiring harness.
    • Carefully peel back the water shield
    • Remove the polystyrene foam block by pulling out the pins.
  2. step : Remove the power window regulator (2:40)
    • Unbolt the window from the regulator with a 10 mm socket and driver
    • Tape up the window with painters tape to secure it out of the way.
    • Un-install the module to pull back the water shield further with your 10 mm socket and driver.
    • Unbolt the three 10 mm nuts anchoring window regulator and motor to the door.
    • Remove the window regulator and unplug the wiring harness.
  3. step : Install the new window regulator from 1A Auto (5:50)
    • Finesse the regulator into the door and situate it into the window tracks.
    • Bolt in the three bolts, fastening the 10 mm nuts with your socket and ratchet to install it.
    • Plug in the wiring harness.
    • Untape the window and lower it into the window regulator and bolt it in.
    • Replace the water shield and bolt the module back on.
    • Reassemble the door panel by clipping it back on and replacing the Phillips screw.
    • Clip the door latch bezel back into place.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Painter's Tape
  • Cloth Rags

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Works great
Came quickly and fit perfectly! 1A Auto has a super helpful video that I followed and installation went flawlessly. It's still working great 8+ months later, would recommend
November 16, 2017
Purchased
1 year ago
very nice
first off i was very happy i got the part fast and it was easy to order so over all i am one happy customer! thank you.
February 18, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2000-2005Buick LeSabre Buick LeSabre Rear Power Window Regulator without Motor Passenger Side

This part replaces:

  • Hollander 135-01807R
  • OE # 25750518
  • Dorman 740-812
Part #: 1AWRG01883


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:16 min)