Replaces

2000-05 Buick LeSabre Window Regulator Pair - 1AWRK00886

These replacement window regulators are just what you need to get your vehicle in good working form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Power operation
  • Replaces dealer part numbers: 25750518, 25750519
  • Do NOT include the power window motors
  • 100% tested prior to leaving the factory
  • Direct replacements
  • Built to strict quality control standards
  • Fit models with Kamco Motor only (Black in color)
    • Do NOT fit models with Valeo Motor (Silver in color)

These window regulators make great replacements and have good cost savings over the dealer parts.

Please Note:  These window regulators are designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note: These window regulators are high quality aftermarket parts that meets or exceeds the performance of the original. They have been subjected to extensive testing and quality control standards. That is why we offer these regulators with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle if this window regulator does not fit the application stated.
  • This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the door panel (1:00)
    • Pry off the door latch bezel
    • Remove the Phillips screw hiding behind it.
    • Use a putty knife and a cloth rag to pry up and unclip the door panel
    • Unplug the wiring harness.
    • Carefully peel back the water shield
    • Remove the polystyrene foam block by pulling out the pins.
  2. step : Remove the power window regulator (2:40)
    • Unbolt the window from the regulator with a 10 mm socket and driver
    • Tape up the window with painters tape to secure it out of the way.
    • Un-install the module to pull back the water shield further with your 10 mm socket and driver.
    • Unbolt the three 10 mm nuts anchoring window regulator and motor to the door.
    • Remove the window regulator and unplug the wiring harness.
  3. step : Install the new window regulator from 1A Auto (5:50)
    • Finesse the regulator into the door and situate it into the window tracks.
    • Bolt in the three bolts, fastening the 10 mm nuts with your socket and ratchet to install it.
    • Plug in the wiring harness.
    • Untape the window and lower it into the window regulator and bolt it in.
    • Replace the water shield and bolt the module back on.
    • Reassemble the door panel by clipping it back on and replacing the Phillips screw.
    • Clip the door latch bezel back into place.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Painter's Tape
  • Cloth Rags

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Buick LeSabre Rear Window Regulators
I would highly recommend 1A-Auto based on my 2 prior purchases:
1. The parts worked perfectly, fit perfectly, and were identical to the original
2. The prices were very satisfactory, and free shipping was included, which is expensive these days.
3. The parts arrived within 5 days of my order submission.
F. Rakoczy
October 6, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2005 Buick LeSabre Rear Power Window Regulator without Motor Pair
Part #: 1AWRK00886

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(11:16 min)