Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement side marker light is just what you need to get your vehicle in good looking form again!

Specifications:

  • RH (Passenger Side) FRONT
    • Bumper mounted
  • Replaces dealer part numbers: 10386586
  • Direct replacement
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Built to strict quality control standards

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Headlight (0:44)
    • Remove the two 10mm bolts from the headlight
    • Pull the headlight forward and out
    • Pull off the headlight wiring harness clip
    • Disconnect the headlight wiring harness
  2. step : Servicing the Parking Light Bulb (1:28)
    • Twist the parking light bulb socket counterclockwise and out
    • Pull the bulb out of the socket
    • Push the new bulb into the socket
    • Twist the socket clockwise and in to the parking light
  3. step : Removing the Parking Light (1:59)
    • Remove two 8mm bolts from the parking light
    • Disconnect the parking light wiring harness
    • Pull the parking light out from behind the bumper
  4. step : Installing the New Parking Light (2:44)
    • Connect the parking light wiring harness
    • Push the new parking light into place from behind the bumper
    • Insert the two 8mm bolts into the parking light
  5. step : Reinstalling the Headlight (4:05)
    • Connect the headlight wiring harness
    • Put on the headlight wiring harness clip
    • Put the headlight into place using the locating tab
    • Insert the two 10mm bolts into the headlight

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

4.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Same as original
That might be a knock on these though. The originals were thin, and these break just as easily.
October 25, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2005Buick LeSabre Buick LeSabre Parking Light Passenger Side
Part #: 1ALPK00935


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:29 min)