2000-05 Buick LeSabre Headlight Pair - 1ALHP00205

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part number: 25713548, 25713547, 19245373, 19245368
  • Includes integrated parking marker lamp
  • Smooth High Beam Lens
  • Includes lens, housing, and mounting panel
  • Bulbs not included
  • Correct for Custom models that do not have a lined or fluted hi-beam lens
    • Not correct for Limited models


Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Changing the High Beam bulb (0:49)
    • Pull counterclockwise on the socket.
    • Pull back on the tabs and pull the bulb free,
    • Replace and twist the socket back in.
  2. step : Removing the Headlight Assembly (1:21)
    • Remove the 10mm bolts at the top back of the headlight.
    • Remove the blue safety clip. Disconnect the lights.
  3. step : Changing the Headlight Bulbs (2:17)
    • Twist the headlight counterclockwise and can be changed.
    • The cornering lights just push the tabs and turn counterclockwise.
    • The side marker light just turns counterclockwise.
  4. step : Replacing the Headlight Assembly (2:48)
    • Twist the signal and side marker light free from the old headlight assembly.
    • Remove the harness on the back of the headlight assembly by removing the three pins that secure it.
    • Put the harness on to the new headlight assembly and replace the three pins.
    • Twist the sockets into place and reconnect the headlights.
    • Push the blue safety tab back into place.
    • Line the headlight assembly up on the car and push it into place.
    • Replace the two 10mm bolts at the top of the headlight.
  5. step : N/A (0:01)

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket

4.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
quick delivery
as advertised. thank-you. even had the bulbs. nice surprise.
June 20, 2017
Headlights are clear and great but....
The headlights are awesome the actual assembly the whole thing is really great, except for whoever glued the black insulation that goes all the way around the headlight assembly glued it in a squiggly line. It was so bad that I couldnt get the headlight assembly to go into its cavity. So i had to peel the strip off of the headlight and reglue it down which was a pain. I figure for 50 bucks per headlight assembly I wouldnt have to do that.
November 16, 2017
replacing 2002 buick head light assys
Your video for changing my head lamps was great and I would recommend you to anyone who needs to do the same Thanks you Barry C Vun Cannon
January 11, 2018
Buick LeSabre Headlights
Easy install. Clear lenses. The rubber seal on the perimeter is a joke. It is flimsy and not even attached to the lens.
June 2, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
How do you know if headlights are lined/fluted?
Isaac H July 7, 2017
On the outside of your OEM lamp there will be lines going across or vertically in front of the outside beam.
Alex P July 7, 2017
I dont know, but they fit on my 2000 fine.
Kenneth A July 7, 2017
I may have asked the same question at my time of purchase. I believe one type is fancier than the other but in the long run the lights were a big improvement over the ones on the car. Make sure you buy new bulbs and dont use the ones that come with the lights. They were only test bulbs and some moisture got in but evaporated shortly thereafter.
Daniel L July 8, 2017
The "lines" referred to are just three small decorative stripes across part of the headlight assembly. I believe these are only on the LeSabre upscale model (Premium ?) and not the "Custom" model which is what I drive. The lines seem to have no functional value other than simply decoration. Note: I also believe that only the "Premium" model has corner/turn lights built into the headlight assembly .... my "Custom" model does not. So if youre replacing headlights on a "Premium" model, go for the "lined" part(s).
THOMASK M July 11, 2017
Year Make Model Description
2000-2005Buick LeSabre Buick LeSabre Custom without Lined / Fluted Hi-Beam Lens Headlight Pair
Part 1ALHP00205
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.