Replaces

2000-05 Buick LeSabre Headlight Driver Side - 1ALHL00114

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Side Location:   Driver Side

Specifications:
  • LH (Driver Side)
  • Replaces dealer part number: 25713547, 19245373
  • Includes integrated parking marker lamp
  • Smooth High Beam Lens
  • Includes lens, housing, and mounting panel
  • Bulbs not included
  • Correct for Custom models that do not have a lined or fluted hi-beam lens
    • Not correct for Limited models

     

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Changing the High Beam bulb (0:49)
    • Pull counterclockwise on the socket.
    • Pull back on the tabs and pull the bulb free,
    • Replace and twist the socket back in.
  2. step : Removing the Headlight Assembly (1:21)
    • Remove the 10mm bolts at the top back of the headlight.
    • Remove the blue safety clip. Disconnect the lights.
  3. step : Changing the Headlight Bulbs (2:17)
    • Twist the headlight counterclockwise and can be changed.
    • The cornering lights just push the tabs and turn counterclockwise.
    • The side marker light just turns counterclockwise.
  4. step : Replacing the Headlight Assembly (2:48)
    • Twist the signal and side marker light free from the old headlight assembly.
    • Remove the harness on the back of the headlight assembly by removing the three pins that secure it.
    • Put the harness on to the new headlight assembly and replace the three pins.
    • Twist the sockets into place and reconnect the headlights.
    • Push the blue safety tab back into place.
    • Line the headlight assembly up on the car and push it into place.
    • Replace the two 10mm bolts at the top of the headlight.
  5. step : N/A (0:01)

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Perfect fit
I ordered the headlight and then watched your video on how to replace it. When it arrived, it took me 10 minutes and it was done. It was a perfect fit and I couldnt be happier.
October 9, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2005Buick LeSabre Buick LeSabre Custom Headlight for Models without Lined / Fluted Hi-Beam Lens Driver Side
Part #: 1ALHL00114


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:31 min)