Replaces

2000-04 Ford Focus Brake Rotor Pair Nakamoto 7S6Z 1125 B - 1ABFS00259

These front brake rotors are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 7S6Z-1125-B, Y54Z-1125-BA, 7S6Z1125B, Y54Z1125BA
  • Fits 4 Stud Wheels
  • Does NOT fit SVT Models or Models with 17 Inch Wheels

These brake rotors make great replacements and have excellent value over the price of dealer brake rotors.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:31)
    • Loosen the lug nuts
    • Lift the vehicle and remove the lug nuts
    • Pull the wheel free
    • Turn the wheel to better access the brakes
  2. step : Removing the Brakes (1:11)
    • Pull off the rubber caps to access the Allen screws
    • Using a 3/8 or 8mm Allen bit loosen those bolts. (Pull them free of the steering knuckle)
    • Use a screwdriver to pry the caliper
    • Lift the caliper off
    • Check the rotors by running the back of your fingernail along them. If they are too rough replace them. (Part stores can check them for you)
    • Press the inner brake pad out
    • Pry the outer brake pad free
  3. step : Reinstall the Brakes (4:32)
    • Use a large C-clamp. Put the inner pad on the caliper and use the C-clamp to push the piston back
    • Put the outer brake pad back into place
    • Put the caliper back into place
    • Tighten the Allen bolts to 25 - 30ft/lbs
    • Put the wheel back into place and replace the lug nuts
    • Lower the vehicle and finish tightening the lug nuts in a star pattern. Tighten to 100ft/lbs
  4. step : Prep the Brakes (7:45)
    • Pump the brakes until they feel firm
    • Test them stopping from 5mph and then 10mph

Tools needed for replacement:

    Allen Wrenches

  • 8mm Allen Wrench

  • General Tools

  • Large C-Clamp
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(08:24 min)

Tools List:

    Allen Wrenches

  • 8mm Allen Wrench

  • General Tools

  • Large C-Clamp
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver



This part replaces:

  • Nakamoto 7S6Z 1125 B

Vehicle Fit

  • 2000-2004 Ford Focus Front Brake Rotor Pair excluding SVT Models Nakamoto
Part #: 1ABFS00259

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: 7S6Z 1125 B

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More