Replaces

2000-04 Ford Focus Brake Rotor Pair Nakamoto 54079-DSZ - 1APBR00221

Specifications:

  • Comes as a matched Pair
  • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 4 Stud Wheels
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Rotor Coating: Zinc Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Quantity: Pair
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:31)
    • Loosen the lug nuts
    • Lift the vehicle and remove the lug nuts
    • Pull the wheel free
    • Turn the wheel to better access the brakes
  2. step : Removing the Brakes (1:11)
    • Pull off the rubber caps to access the Allen screws
    • Using a 3/8 or 8mm Allen bit loosen those bolts. (Pull them free of the steering knuckle)
    • Use a screwdriver to pry the caliper
    • Lift the caliper off
    • Check the rotors by running the back of your fingernail along them. If they are too rough replace them. (Part stores can check them for you)
    • Press the inner brake pad out
    • Pry the outer brake pad free
  3. step : Reinstall the Brakes (4:32)
    • Use a large C-clamp. Put the inner pad on the caliper and use the C-clamp to push the piston back
    • Put the outer brake pad back into place
    • Put the caliper back into place
    • Tighten the Allen bolts to 25 - 30ft/lbs
    • Put the wheel back into place and replace the lug nuts
    • Lower the vehicle and finish tightening the lug nuts in a star pattern. Tighten to 100ft/lbs
  4. step : Prep the Brakes (7:45)
    • Pump the brakes until they feel firm
    • Test them stopping from 5mph and then 10mph

Tools needed for replacement:

    Allen Wrenches

  • 8mm Allen Wrench

  • General Tools

  • Large C-Clamp
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2004 Ford Focus Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair (excluding SVT Models) Performance Nakamoto

This part replaces:

  • Nakamoto 54079-DSZ
Part #: 1APBR00221

Nakamoto
Brand #: 54079-DSZ

How-to Video:

(08:24 min)