Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Light Option:   Halogen

Specifications:
  • RH (Passenger Side)
  • Bulbs and wiring not included
  • Replaces dealer part numbers: 3S4Z-13008-CA, 3S4Z13008CA
  • Does NOT fit SVT models
  • Does NOT fit vehicles with HID (high intensity discharge) xenon lighting
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Remove front grille (0:40)
    • Remove the retaining clips on the front grill cover.
    • Remove the four bolts securing the grill using a 10mm socket and ratchet and extension.
    • Twist the parking light bulbs counter clockwise and remove the bulbs.
  2. step : Remove the headlight assembly (2:03)
    • Remove the two 10mm bolts and Phillips screw to remove the headlight assembly
    • Disconnect the harness from the headlight assembly.
  3. step : To replace bulbs (3:00)
    • Push the tab in and up remove and disconnect the bulb.
    • Put the new bulb in and plug them in.
    • DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
  4. step : To install a new headlight assembly (3:46)
    • Use snub nosed pliers to remove the wire ties and retaining pins.
    • Seal the headlight with the rubber boot that comes with the assembly.
    • Plug in the wiring harness
    • Bolt the assembly in using your 10 mm socket, ratchet and extension and Phillips screwdriver.
  5. step : Replace grille/Change parking lights (6:22)
    • If you need to replace the parking light bulbs, you can just by disconnecting them and plugging in the new ones.
    • Bolt the grill back on and clip the plastic trim back on.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Wire End Cutters

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Ford Focus Wagon Headlight
The tail light and head light worked and delivered fine however unfortunately my daughters Ford Focus head gasket went at the time I was going to install and I ended up doing a sacrifice sale . I returned the part and received a full return . Everything looked original . Never got to install but received a full refund .
February 19, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2002Ford Focus Ford Focus (excluding SVT Models) Halogen Headlight Passenger Side
Part #: 1ALHL00160


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:54 min)