Replaces

2000-01 Dodge Ram 1500 Truck Steering & Suspension Kit - 1ASFK02576

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   12 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (1) Pitman Arm
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Upper Ball Joints
      (1) Idler Arm
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 12 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:44)
    • Loosen the five 19mm lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Slide off the wheel
  2. step : Removing the Sway Bar Link (1:11)
    • Apply rust penetrant to the sway bar link
    • Attach a 17mm wrench to the top sway bar link nut
    • Brace the wrench against the vehicle frame
    • Turn the 16mm bolt at the bottom of the sway bar link to loosen the nut
    • Remove the 17mm nut
    • Tap the top of the bolt with a hammer
    • Remove the sway bar link bolt
    • Remove the sway bar link bushings, washers, and sleeve
  3. step : Installing the Sway Bar Link (2:35)
    • Slide a washer onto the sway bar link bolt
    • Slide a bushing onto the sway bar link bolt
    • Slide the sway bar link bolt through the control arm
    • Slide a bushing onto the sway bar link bolt
    • Slide a washer onto the sway bar link bolt
    • Slide the sleeve onto the sway bar link bolt
    • Slide a washer onto the sway bar link bolt
    • Slide a bushing onto the sway bar link bolt
    • Insert the sway bar link bolt into the sway bar
    • Slide a bushing onto the sway bar link bolt
    • Raise the suspension with a jack
    • Slide a washer onto the sway bar link bolt
    • Thread the nut onto the sway bar link
    • Attach a 17mm wrench to the top sway bar link nut
    • Counterhold the sway bar link nut with the wrench
    • Tighten the sway bar link bolt with a 16mm socket and ratchet
    • Lower the suspension by lowering the jack
  4. step : Installing the Wheel (4:44)
    • Slide the wheel into place
    • Start the five 19mm lug nuts
    • Lower the vehicle to the ground
    • Torque the lug nuts to 100 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Sockets - Metric

  • 19mm Socket
  • 16mm Socket
  • 17mm Socket

  • Wrenches - Metric

  • 17mm Wrench

4.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
1
0
0
Excellent!
All parts were correct. Package was shipped on time. No complaints
March 19, 2018
great parts for a great price
My review of these parts are not going to be precise due to the fact you cannot give a through review a week after you buy something. So my review is this the pricing is wonderfully affordable. The shipping was as expected as for the product it appears to be made well with the only thing that hinders me is that it doesnt have grease fittings in anything. give me six months to a year to ask for an honest review of a product of this type.
August 15, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2001Dodge Ram 1500 Truck Dodge Ram 1500 Truck Rear Wheel Drive 12 Piece Set Steering & Suspension Kit
Only 1 left in stock
Part #: 1ASFK02576


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:31 min)