Description
Warranty & Shipping
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set

Specifications:

  • Comes as a Set of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) Front Upper & Lower
  • Direct replacements
  • Built to strict quality control standards
  • Fits models with Dana 44 Axle
  • Correct for 4WD (Four Wheel Drive) Models only

Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greasable versions.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

3.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
1
0
0
One side fits
Okne side of the ball joints fit really well bit the other side dosent seem to fit.
July 26, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
who is the manufacturer of these ball joints?
Dakota G March 12, 2016
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle and are covered by a lifetime warranty. If you have any further questions, please dont hesitate to ask.
Brian F March 14, 2016
Not for Shore
F R October 19, 2017
Chevrolet
S T October 26, 2018
Do they ball joints need to be pressed?
Amanda P September 18, 2016
Yes, they are press in....
James W September 18, 2016
yes, they are pressed into the flanges on the axle.
Crissy G September 18, 2016
Yes
Aubrey O September 18, 2016
Yes they do
Glenn H September 18, 2016
Yes they do need to be pressed in. I did it easily with a cheap ball joint press kit from the internet and an impact wrench.
Adam C September 19, 2016
Yes the upper and lower both press in and out fairly easy just make sure they are straight in line with opening one wants to be difficult at times make sure you remove the clip on the top one before you press it out
STRETCH S September 19, 2016
Yes. Most auto supply stores will rent out the tool kit for a deposit, Advance Auto Parts, for example. You will most likely need a large breaker bar and a lot of leverage to press out the old ones.
Joseph C September 19, 2016
Yes they will be press in applications.
Derek C September 19, 2016
Yes
Nick D September 20, 2016
what brand are these ball joints?
Derrick M July 1, 2017
No sure they come in a white box. I have a set on my lifted 01 dodge. Been on since May of 2016. With no issues. Hope this helps.
Glenn H July 1, 2017
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please dont hesitate to ask.
Tim K July 2, 2017
are these ball joints greased already or not greased?
Derrick M July 9, 2017
These ball joints are sealed and pre-packed with grease!
Tim K July 9, 2017
Two are and two have grease plugs
J B July 27, 2017
Not
F R October 19, 2017
Already greased
Jay H November 8, 2018
Will these fit a 195mm front axle?
Edward M August 17, 2017
We are unsure of the MM cross reference, but if you could supply us your VIN number or confirm the current axle is a Dana 44 we may provide the correct parts.
Alex P August 17, 2017
Thank you for the quick response. With the use of your VIN, the OEM supplied axle was a Dana M44F, and was listed for a 216MM FBI. These ball joints do list as fits for the Dana 44 axle.
Alex P August 17, 2017
how do i know if my truck has a dana 44 front axle?
Shane C December 6, 2017
We may take a look into this if you could provide us the vehicle VIN number. You may also obtain this information by contacting your local dealership with the VIN, or by checking the front axle for any markings.
Alex P December 6, 2017
Year Make Model Description
2000-2001Dodge Ram 1500 Truck Dodge Ram 1500 Truck 4 Wheel Drive Front Upper & Lower Ball Joint 4 Piece Set for Models with Dana 44 Axle
Part #: 1ASFK00710


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout