1ABFS02495-1999 Ford Front Semi-Metallic Brake Pad & Rotor Kit

Replaces

1999 Ford Front Semi-Metallic Brake Pad & Rotor Kit DIY Solutions

1ABFS02495

Part Details

  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Front Brake Rotor Diameter: 13.03 in. (331mm)
  • Front Brake Rotor Venting Type: Vented
  • Wheel Lug Count: 8 Lug
  • Brake Pad Friction Material: Semi-Metallic

This part replaces:

  • DIY Solutions BFS03854
FREE SAME DAY SHIPPING
Save 34%
List: $280.95 Save: $96.00
Part 1ABFS02495
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: BFS03854

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Wheel Lug Count:   8 Lug
  • Brake Pad Friction Material:   Semi-Metallic
  • Front Brake Rotor Diameter:   13.03 in. (331mm)
  • Front Brake Rotor Venting Type:   Vented
  • Kit Includes:
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front Replacement Brake Rotors

Brake Rotor Specifications:

  • Professional Grade SEMI-METALLIC Disc Brake Pads
  • 4 Piece Front brake pad set
  • Direct replacement

Brake Pad Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: F81Z1102BA, F81Z 1102 BA
  • Fits 8 Lug Wheels
  • Vented
  • 13.03" diameter
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Remove the Wheel (0:56)
    • Pry the center cap off.
    • Loosen the lug nuts.
    • Raise the vehicle.
    • Remove the lug nuts.
    • Remove wheel. (If it is stuck, replace one lug nut and hit the wheel till it brakes loose).
  2. step : Removing the Brakes (2:16)
    • Remove the two bolts on the back of the brake calipers.
    • Place a screwdriver in the side of the caliper and pry the brake pistons back in.
    • Remove the Caliper.
    • Pull the brake pads out and remove the spring.
  3. step : Removing the Rotors (5:10)
    • Remove the two 21mm bolts from the bracket. (Use a breaker bar or piece of pipe for leverage.
    • Remove the caliper bracket.
    • Spray the studs and hub with penetrating oil and let it sit.
    • Pry the disc free from the hub.
  4. step : Replacing the Brakes (6:47)
    • Put the rotor in place.
    • Replace the slides in the brake calipers with the new slides.
    • Replace the caliper bracket.
    • Reinsert the 21mm bolts in the bracket. Torque to 145ft/lbs.
    • Put your old pads in the caliper bracket and use a c-clamp to push the pad into the caliper and reset the pistons.
    • Wire brush the slides if old, and put them back into place.
    • Slide the new pads into place.
    • Put the caliper back into place and reinsert the caliper bolts. Torque to 23 - 25ft/lbs.
  5. step : Replace the Wheel (12:08)
    • Put the wheel into place.
    • Replace the lug nuts.
    • Lower the vehicle and tighten the lug nuts in a crossing pattern. Torque to 120ft/lbs.
    • Replace the center cap.
  6. step : Road Test Before Use (12:37)
    • Pump the brakes until they are firm.
    • Test stopping from 5mph
    • Test stopping from 10mph.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Large Hammer
  • Large C-Clamp

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 17mm Socket
  • 16mm Socket
  • 21mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1999Ford F250 Super Duty Truck Ford F250 Super Duty Truck Front Semi-Metallic Brake Pad & Rotor Kit
1999Ford F350 Super Duty Truck Ford F350 Super Duty Truck with Single Rear Wheels (SRW) Front Semi-Metallic Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 54071
Bendix PRT5255
DuraGo BR54071
Raybestos Brakes 66785
Wagner BD125645

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: BFS03854
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
??
?? 99 f250
December 11, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


1999 Ford Front Semi-Metallic Brake Pad & Rotor Kit DIY Solutions-1ABFS02495 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.