Brake Rotor Specifications:

  • Professional Grade SEMI-METALLIC Disc Brake Pads
  • 4 Piece Front brake pad set
  • Direct replacement

Brake Pad Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: F81Z1102BA, F81Z 1102 BA
  • Fits 8 Lug Wheels
  • Vented
  • 13.03" diameter

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Front Brake Rotor Specifications: 13.03" (331mm)
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 8 Lug
  • Brake Pad Friction Material: Semi-Metallic

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the Wheel (0:56)
    • Pry the center cap off.
    • Loosen the lug nuts.
    • Raise the vehicle.
    • Remove the lug nuts.
    • Remove wheel. (If it is stuck, replace one lug nut and hit the wheel till it brakes loose).
  2. step : Removing the Brakes (2:16)
    • Remove the two bolts on the back of the brake calipers.
    • Place a screwdriver in the side of the caliper and pry the brake pistons back in.
    • Remove the Caliper.
    • Pull the brake pads out and remove the spring.
  3. step : Removing the Rotors (5:10)
    • Remove the two 21mm bolts from the bracket. (Use a breaker bar or piece of pipe for leverage.
    • Remove the caliper bracket.
    • Spray the studs and hub with penetrating oil and let it sit.
    • Pry the disc free from the hub.
  4. step : Replacing the Brakes (6:47)
    • Put the rotor in place.
    • Replace the slides in the brake calipers with the new slides.
    • Replace the caliper bracket.
    • Reinsert the 21mm bolts in the bracket. Torque to 145ft/lbs.
    • Put your old pads in the caliper bracket and use a c-clamp to push the pad into the caliper and reset the pistons.
    • Wire brush the slides if old, and put them back into place.
    • Slide the new pads into place.
    • Put the caliper back into place and reinsert the caliper bolts. Torque to 23 - 25ft/lbs.
  5. step : Replace the Wheel (12:08)
    • Put the wheel into place.
    • Replace the lug nuts.
    • Lower the vehicle and tighten the lug nuts in a crossing pattern. Torque to 120ft/lbs.
    • Replace the center cap.
  6. step : Road Test Before Use (12:37)
    • Pump the brakes until they are firm.
    • Test stopping from 5mph
    • Test stopping from 10mph.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Large Hammer
  • Large C-Clamp

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 17mm Socket
  • 16mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1999Ford F250 Super Duty Truck Ford F250 Super Duty Truck Front Semi-Metallic Brake Kit
1999Ford F350 Super Duty Truck Ford F350 Super Duty Truck with Single Rear Wheels (SRW) Front Semi-Metallic Brake Kit
Part #: 1ABFS02495


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(13:09 min)