This replacement Ford Crown Victoria Tail light is just what you need to get your Ford in good looking form again!

Specifications:

  • RH (Passenger Side)
    • Quarter (1/4) panel mounted
  • Replaces dealer part number: YW7Z-13404-AA, YW7Z13404AA
  • 2 bulb design
  • All red design with black trim
  • Can be used on Sport & Police models, but will need to have holes drilled for repeater lights if flashers are installed
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Does not include bulbs or wiring

We have noticed that there are many inferior quality Tail lights on the market. We have researched other Tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket Tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Ford Crown Victoria taillamp is a great replacement and has good cost savings over a taillamp from the dealer.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

  • Light Option: Black Bezel
  • Color: Red

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight Assembly (0:55)
    • Twist off the plastic clip behind the taillight.
    • Pull the side insulation panel off.
    • Pull the insulation panel behind the taillight back.
    • Remove the three 11mm nuts on the back of the taillight.
    • Pull the taillight forward.
  2. step : Replacing a Bulb (2:02)
    • Twist out the socket.
    • Pull the bulbs straight out.
    • Push the new bulb into place.
    • Twist the socket back into place.
  3. step : Replacing the Taillight Assembly (2:30)
    • Twist the sockets into the new taillight assembly.
    • Line up the taillight and push it into place.
    • Replace the three 11mm nuts.
    • Put the insulation panel back into place.
    • Twist the plastic clip back into place.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 11mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1999-2009Ford Crown Victoria Ford Crown Victoria Outer Red Tail Light with Black Bezel Passenger Side

This part replaces:

  • Partslink FO2801160
  • Hollander 166-01897AR
  • OE # YW7Z13404AA
  • TYC 11-5371-91-1
  • DEPO 331-1964R-US-R
Part #: 1ALTL00432


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:56 min)