Replaces

1999-09 Ford Crown Victoria Tail Light - 1ALTL00431

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Color:   Red
  • Light Option:   Black Bezel

This replacement Ford Crown Victoria Tail light is just what you need to get your Ford in good looking form again!

Specifications:

  • LH (Driver Side)
    • Quarter (1/4) panel mounted
  • Replaces dealer part number: YW7Z-13405-AA, YW7Z13405AA
  • 2 bulb design
  • All red design with black trim
  • Can be used on Sport & Police models, but will need to have holes drilled for repeater lights if flashers are installed
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Does not include bulbs or wiring

We have noticed that there are many inferior quality Tail lights on the market. We have researched other Tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket Tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Ford Crown Victoria taillamp is a great replacement and has good cost savings over a taillamp from the dealer.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Taillight Assembly (0:55)
    • Twist off the plastic clip behind the taillight.
    • Pull the side insulation panel off.
    • Pull the insulation panel behind the taillight back.
    • Remove the three 11mm nuts on the back of the taillight.
    • Pull the taillight forward.
  2. step : Replacing a Bulb (2:02)
    • Twist out the socket.
    • Pull the bulbs straight out.
    • Push the new bulb into place.
    • Twist the socket back into place.
  3. step : Replacing the Taillight Assembly (2:30)
    • Twist the sockets into the new taillight assembly.
    • Line up the taillight and push it into place.
    • Replace the three 11mm nuts.
    • Put the insulation panel back into place.
    • Twist the plastic clip back into place.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 11mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2009Ford Crown Victoria Ford Crown Victoria Outer Red Tail Light with Black Bezel Driver Side
Part #: 1ALTL00431


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:56 min)