This replacement Tail light is just what you need to get your vehicle in good looking form again!

Specifications:

  • LH (Driver Side) Inner
    • Mounts on the trunk lid
    • Includes reverse lamp
  • Replaces dealer part number: 22642087
  • Includes lens & housing
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement

This Tail light makes a great replacement and has good cost savings over a dealer unit.

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Servicing the Tail Light Bulb (0:38)
    • Twist the tail light bulb socket counterclockwise and out
    • Pull the bulb off the socket
    • Push the bulb onto the socket
    • If you are only servicing the bulbs, twist the bulb socket clockwise into the light
  2. step : Removing the Tail Light (1:02)
    • Remove the three 10mm nuts from the tail light
    • Pull the tail light out
    • Disconnect the tail light wiring harness
    • Twist the bulb sockets counterclockwise out of the tail light
    • Replace the bulbs if necessary
  3. step : Installing the Tail Light (2:00)
    • Twist the bulb sockets clockwise into the tail light
    • Put the tail light into place
    • Fasten the three 10mm nuts onto the tail light
    • Connect the tail light wiring harness

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2004 Olds Alero Inner Tail Light Driver Side

This part replaces:

  • Partslink GM2882103
  • Hollander 166-01947L
  • OE # 22642087
  • DEPO 336-1302L-AS
Part #: 1ALTL01475

Out of Stock

How-to Video:

(03:16 min)