1999-04 Jeep Grand Cherokee Wheel Hub Bearing & Axle Kit TRQ BHA52929 - 1AAHK00012

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   4 Piece Set


  • 4 Piece Kit includes:
    • (2) - Front CV Style Axle Shafts - LH (Driver Side) & RH (Passenger Side)
    • (2) - Front Wheel Bearing & Hub Assemblies - LH (Driver Side) & RH (Passenger Side)
  • Brand New, not refurbished or rebuilt
  • Fits 5 Lug Wheel
  • No core charges
  • For models with Select Trac or Quadra Trac 4WD system (Marked on shifter console)
  • Will not fit models with Quadra Drive System

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (1:18)
    • Loosen the lug nuts and the hub nut.
    • Raise and secure the vehicle
    • Remove the lug nuts and the wheel.
    • Remove the hub nut with a 1-7/16 socket after removing the cotter pin and washer.
    • Have a helper hold down the brakes to allow you to break the nut loose.
  2. step : Disassemble the brakes (2:12)
    • Compress your caliper using a flat blade screwdriver.
    • Unbolt the caliper with 11/16 inch socket and ratchet.
    • Remove and inspect the brake pads.
    • If they are worn out, replace them during reassembly.
    • Use wire ties to secure the caliper up and out of the way.
    • Remove the caliper bracket by unbolting the 3/4 inch bolts.
    • Pull the brake disc/rotor off and inspect for wear.
    • If it shows signs of needing to be changed, such as deep grooves, replace during reassembly.
  3. step : Remove the hub (7:45)
    • Use a hammer to break the axle loose.
    • Hit the three 13 mm 12 point nuts with some penetrating oil and use a breaker bar, socket and ratchet to remove.
    • Remove the hub bolts and use a hammer to work the hub out and off.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Socket Driver
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 13mm Socket

  • Sockets - SAE

  • 3/4 Inch Socket
  • 11/16 Inch Socket
  • 1-7/16 Inch Socket

5.00/ 5.0
10 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Axle and hub unit wheel bearings
Great product! Exactly what I ordered. No complaints. Bought lots of products from and Ive never had a problem
January 22, 2017
So far so good
I got these parts fairly quick despite the issue with the bearings not showing up with the axles. But the customer service team was great in resolving the issue. The parts went right in and so far seem to be of excellent quality. I would recommend to anyone.
February 26, 2017
This product was exactly as described. The people on the phone were courteous and knowledgeable. Shipping was free which made this a even better deal and arrived with in 3 days. I had no issues with parts fitting whatsoever exact replacement. I will be ordering from here again.
March 30, 2017
excellent price
not only good price but is a quality product will purchase again on my next project i am working on
June 29, 2017
Fast ship High quality Seamless install Cheap price Excellent experience
October 29, 2017
Awesome Deal!
The hardest part was getting the old hubs, and axles out. These new parts were easy to assemble, and slid right in perfectly. This is a steal! Awesome Deal!
March 13, 2018
Products fit as they should and were easy to install after getting the rotors and old bearings off.
March 23, 2018
Very satisfied
Found the site from a simple Google search. Was pleasantly surprised at the ease of the site. After I put in my vehicle it showed me not only what I was looking for but several other parts that I needed to compliment my scheduled repair so I got them as well. It made sense that while I had it apart to replace these as well. I am now registered with them and go there first for any part I need. I have also told several friends about them. Very satisfied.
April 5, 2018
1999 Jeep Grand Cherokee wheel hub bearing and axel kit
Parts fit great. The video was great. Very good value. I want to go through my hole front end now .
June 23, 2018
All 4 parts were cheaper than a single OEM
They arrived with the box inn tatters but I cant blame them for 80 lbs of parts. They fit in perfectly and have worked great so far. It would have been nice to include the bolts on the wheel hub but it isnt the end of the world. Great value.
July 28, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What brand are the wheel hub assemblies?
Manny M May 3, 2016
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle and are covered by a two year warranty. If you have any further questions, please dont hesitate to ask.
Derek C May 3, 2016
Unfortunately I cannot remember, but my mechanic of 10 years recommended me to purchase these from 1A Auto & he had no issues installing these except for having a little trouble getting the old ones off which he said was normal. I have had no issues since. They work great.
Charles G May 3, 2016
Wheel studs included?
Richard W October 16, 2017
Yes wheel studs were installed on the Hubs
Jose R October 16, 2017
JOHNATHAN T October 16, 2017
Yes new wheel studs
Rodney C October 17, 2017
Yes the wheel studs are included.
Jerry M October 17, 2017
N D June 23, 2018
Does this fit rwd models?
Brandan H January 5, 2018
Thanks for your question! The wheel bearings will work for your vehicle, but your vehicle does not have front axles. Thank you!
Adam G January 5, 2018
Not sure sure I have a 4x4 Wj and they fit perfect.
Steven P January 5, 2018
I am not sure we bought this one for the front. The front is one shorter than the other, the rear has 2 equal lengths so probably not
Kristen C January 5, 2018
Yes it does
Phillip B January 6, 2018
Well this is made for the 4x4 models, and rwd models won’t need front axles , so the hubs my not work ?
JOHNATHAN T January 6, 2018
Will these fit a 99 jeep grand Cherokee limited with 4 7 liter and quadratrac 2 ?
Donald V March 24, 2018
Yes 100 o/o will work for your application
Phillip B March 28, 2018
Year Make Model Description
1999-2004Jeep Grand Cherokee Jeep Grand Cherokee Front Wheel Hub Bearing & Axle Kit 4 Piece Set for Models with SELECT-TRAC 4WD System (Part Time 4WD) TRQ
1999-2004Jeep Grand Cherokee Jeep Grand Cherokee Front Wheel Hub Bearing & Axle Kit 4 Piece Set for Models with QUADRA-TRAC 4WD System (Full Time 4WD) TRQ
Part #: 1AAHK00012

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: BHA52929

How-to Video:

(10:54 min)