Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Item Condition:New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Hood Lift Support 1999-2004 Jeep Grand Cherokee
How to Replace Lift Support 1999-2004 Jeep Grand Cherokee
How to Replace Back Glass Lift Support 1999-2004 Jeep Grand Cherokee
Created on:
Tools used
Flat Blade Screwdriver
1. Remove the old support strut
Lift and secure your hood.
Use a flat blade screwdriver to unclip the support strut from the hood and edge of the engine bay.
2. install the new support strut
Clip the support strut to the hood and edge of the engine bay.
Repeat on the other side.
Close your bonnet.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. In this video, we show you how to replace the hood struts on this 2004 Jeep Grand Cherokee, same as a '99 to '04. Big problem, if your hood is not staying up when you want it to and the only tool you'll need is a small flat blade screw driver. Okay. While your jeep's have this problem, lift up the hood, doesn't want to stay up.
Really easy problem to fix. Just need a small screw driver, hold your hood up, there's a little room right here, you pry a clip down. Pry a clip down, pull that off. Okay. Same thing down further here. You could probably just force that one off. Okay. Cut right off and then take your new one, out it on there. Okay. Put it on there. Even with one now ...Okay and repeat it for the other side. Put down, pull off, pull off like that, put your new one on, twist it a little bit, make sure the clip goes up in there and your hood goes up, stays up and then comes down when you want it to.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
13mm Socket
Socket Extensions
T40 Bit
Ratchet
1. Replace the tailgate support strut
Remove the T40 Torx bolts on each end of the strut.
Pull the strut out.
2. install the new support strut
Install the two 13 mm bolts with your socket and ratchet.
Clip the support strut in.
Brought to you by 1AAuto.com. Your source for quality replacement parts and the best service on the internet. In this video we're going to show you how to replace the rear hatch struts on this 2004 Grand Cherokee. Same as any '99 to '04. The only tools you'll need, you do need a T40 Torx bit with a ratchet and an extension. Then to put our new ones in you'll need a 13 mm socket.
Over time these cylinders wear out causing your tailgate to sag. Actually you can see that they're still good on this one, but some people are probably familiar with a piece of wood or broom or something that holds the tailgate up. It's annoying when you reach for your favorite swimming toy and you get hit in the head with the tailgate. In all seriousness this can be a very dangerous situation for a small child or something. Replacing these struts is pretty easy. Even though this vehicle doesn't need them I'm going to show you how to take them off and put them back on. Most basic tools sets will have 3/8 ratchet and sometimes an extension. Probably the one different tool; this is T40 Torx bit. Next you want to take your Torx driver and insert it about here on the bottom; then on the top, same thing right in there. I'm going to fast forward through removing those two bolts.
I highly recommend having someone help you here. You can see I reach up just to make sure the tailgate doesn't go anywhere. Make sure then that that weight rests onto the board. Best if you have a helper to help you out when you're removing this. New ones from 1A Auto. They come with little studs. They're a little different than the originals. You put those into place with the original Torx screws down here and on top up here. Then use a 13mm socket to tighten them up, or a wrench would work fine. Then you want to install these with the skinny side down. They install very easily. You put them onto the socket and press. Then up here you'll need to probably lift up your tailgate some. Put them on the socket and press and then they're on there nice and tight. You can replace the other side the same way and then you'll be able to reach your favorite swimming toy or your favorite gardening hat without getting hit by it.
We hope this helps you out. Brought to you by www.1AAuto.com. Your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Gloves
Pole Jack
T30 Driver
T40 Bit
3/8 Inch Drive Ratchet
Safety Glasses
Pocket Screwdriver
BHS04001
In Stock
Product Reviews
Loading reviews
5.00/ 5.03
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Lift me up!
Kip
May 13, 2019
I purchased an 03 jeep grand Cherokee in mint condition. It needs some TLC. The lift supports for the hood and window tailgate was done for. But i knew where i could get good quality parts at a reasonable. So i reached out to 1a auto and as always they have the parts and ship out in no time. Now i no longer have to use a board to hold up my hood. Thank you 1a auto
great price fast delivery
james
April 10, 2020
very competitive pricing, fast delivery, perfect fit, great instructional videos and absolutely hassle free
Lift supports
P
July 27, 2020
Perfect fit. Easy to install. Stronger than original.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.