Replaces

1999-04 Jeep Grand Cherokee Lift Support - 1ALSP00145

Are your hood, hatch, & liftglass not staying open anymore? The problem could be the lift supports. These get weak over time and require replacing. No need to lose money at the dealer for this simple do it yourself replacement. Our lift supports are just what you are looking for to make your rear hatch, glass, or hood work correctly again.

Specifications:

  • Comes as a SET of 6
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Note:

It is necessary to reuse your original hardware, as new hardware is not included with this item.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Replace the tailgate support strut (1:01)
    • Remove the T40 Torx bolts on each end of the strut.
    • Pull the strut out.
  2. step : install the new support strut (1:50)
    • Install the two 13 mm bolts with your socket and ratchet.
    • Clip the support strut in.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 13mm Socket

  • Torx Drivers & Sockets

  • T40 Torx Bit

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2004 Jeep Grand Cherokee Hood, Hatch, & Liftglass Lift Support 6 Piece Set
Part #: 1ALSP00145

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:06 min)