Replaces

1999-04 Honda Odyssey Strut & Spring Assembly Front Monroe Quick-Strut 171598 - MNSTS00109

Why Buy Monroe Quick-Strut Assemblies?

Monroe Quick-Strut assemblies are high quality and easy-to-install. Some of its benefits include:

  • Application specific technology
  • Restores factory ride height and feel
  • Quicker installation time than bare strut assemblies
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:02)
    • Loosen the lug nuts with a lug wrench
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  2. step : Remove the bottom of the strut (1:35)
    • Apply penetrating oil to the nuts on the bottom of the strut.
    • Use a breaker bar and penetrating oil to unbolt the 18 mm strut bolts on the bottom
    • Unclip the ABS sensor wire.
  3. step : Remove the top of the strut (4:35)
    • Pop the hood and secure it.
    • Use a flat blade screwdriver to pry up the little covers to access the 14 mm nuts.
    • Apply penetrating oil to the 14 mm nuts at the top of the strut.
    • Hold onto the strut as you remove it.
  4. step : Install the new strut (6:03)
    • Bolt the strut back in, torquing your 14 mm bolts to 30 ft lbs
    • Have someone help you guide the top of the strut into place and get the nuts started under the cover.
    • Insert your spindle to the lower end of the strut and raise your control arm until the bolt holes line up.
    • Torque the bottom 18 mm nut to 85 ft lbs
    • Make sure you don’t pinch your ABS wire and its placed correctly.
  5. step : Replace the wheel (9:40)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft lbs using a star pattern.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 18mm Socket
  • 22mm Socket
  • 19mm Socket
  • 20mm Socket

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2004 Honda Odyssey Strut & Spring Assembly Front Driver Side Monroe Quick-Strut 171598

This part replaces:

  • Monroe Quick-Strut 171598
  • Hollander 527-59546L
Only 3 left in stock
Part #: MNSTS00109



Monroe Quick-Strut
Brand #: 171598

How-to Video:

(10:26 min)