1999-04 Honda Odyssey Headlight - 1ALHL00475

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

  • LH (Driver Side)
  • Includes lens, housing, and mounting panel
  • Includes Integrated parking/marker lamp
  • Replaces dealer part numbers: 33151-S0X-A01, 33151S0XA01
  • Bulbs not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Changing the Headlight Bulb (0:54)
    • Reach back behind the headlight and remove the wiring harness.
    • Remove the boot.
    • Push the wire retainer towards the front of the car and flip it up and out.
    • Pull the bulb out.
    • Replace bulb and lock retainer back into place.
    • Replace boot and plug in the wiring harness.
  2. step : Accessing the Headlight Assembly (2:48)
    • Pry the 11 clips out from the panel (front panel under the hood).
    • Remove the panel.
    • Pry the four clips out that are underneath the van.
    • Remove the 10 mm bolt near the front wheel on the side fender and the 8 mm bolt above it. (Do this on both sides)
    • Push down on the bumper and pull out on either side to remove the bumper cover.
    • Disconnect fog lights if equipped.
  3. step : Changing the Headlight Assembly (5:42)
    • Remove the four 10mm bolts securing the headlight.
    • Pull the light forward and disconnect the wiring harness and side light.
    • Remove the bulb from the headlight.
    • Remove the filler bulb from the new light and replace with the bulb from the old headlight.
    • Plug in the side light and wiring harness.
    • Line up the tabs on the headlight with the holes in the fender.
    • Reinstall the clip under the light and start the bolts to hold it in place as you line up the light.
    • Reinstall the bumper and panel.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket

5.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Fantastic Service!
We ordered replacement headlights on two occasions and each were delivered in exceptional time in carefully packaged boxes. We couldnt be more pleased with this company!
June 18, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2004Honda Odyssey Honda Odyssey Headlight Driver Side
Part #: 1ALHL00475

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:29 min)