Replaces

1999-04 Honda Odyssey CV Axle Shaft TRQ CSA82221 - 1AACV00101

Specifications:

  • Fits LH (Driver Side) FRONT OUTER
  • Brand New, not refurbished or rebuilt
  • Built to strict quality control standards
  • No core charge

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (1:00)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
    • Kick the tire to loosen the wheel, if necessary
  2. step : Removing the Axle Shaft (1:36)
    • Straighten the axle nut dimple with a hammer and a punch
    • Have an assistant press the brake pedal
    • Remove the 36mm hub nut
    • Remove the cotter pin from the ball joint nut with a pick and needle nose pliers
    • Remove the 17mm nut from the ball joint
    • Thread the 17mm nut partially on
    • Separate the ball joint from the steering knuckle with a pickle fork and a hammer
    • Remove the 17mm bolt from the ball joint
    • Pry down on the lower control arm with a pry bar
    • Pull the ball joint out of the steering knuckle
    • Push the axle out of the hub with a flat blade screwdriver
    • Push the axle away from the transmission with a pry bar and a hammer
    • Pull the axle out through the wheel well
  3. step : Installing the New Axle Shaft (4:58)
    • Push the new axle shaft into the transmission
    • Push the axle shaft into the hub
    • Push the ball joint into the steering knuckle
    • Put the 17mm nut onto the ball joint
    • Turn the nut so that the cotter pin will fit through the castle nut
    • Push the cotter pin into the ball joint nut
    • Thread on the hub nut by hand
    • Tighten the hub nut preliminarily
  4. step : Reattaching the Wheel (6:12)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 95 - 100 foot-pounds of torque in a crossing or star pattern
    • Tighten the hub nut to 180 foot-pounds

Tools needed for replacement:

    General Tools

  • Assistant
  • Center Punch
  • Floor Jack
  • Hammer
  • Jack Stands
  • Pick

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 36mm Socket

  • Specialty Tools

  • Pickle Fork

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
I assume this will fit a 2003 as well?
Dietrich S on Feb 24, 2017
BEST ANSWER: This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit. Please feel free to call our customer service department for clarification @ 888-844-3393.

Vehicle Fit

  • 1999-2004 Honda Odyssey Front Outer CV Axle Shaft Driver Side TRQ CSA82221

This part replaces:

  • OE # 44306S0XA52
  • OE # 44306S0XA51
  • Hollander 447-60407L
  • TRQ CSA82221
  • A1 Cardone 66-4164
Part #: 1AACV00101

TRQ
Brand #: CSA82221

How-to Video:

(07:09 min)