Replaces

1999-04 Honda Odyssey CV Axle Shaft Pair - 1AACS00048

These axle shafts are new, aftermarket parts. They are just what you need to get your vehicle in good working order!

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver) and RH (Passenger) FRONT OUTER
  • Replaces dealer part numbers: 44305-S0X-A51, 44305-S0X-A52, 44306-S0X-A51,44306-S0X-A52, 44306S0XA51,44306S0XA52, 44305S0XA51, 44305S0XA52
  • Brand New, not refurbished or rebuilt
  • Built to strict quality control standards
  • No core charge

Axle shafts may need replacing for a variety of different reasons. On vehicles that do heavy work or endure other extreme use you can actually break an axle or strip the splines or teeth. More often the CV joint wears out causing noises and vibration while accelerating or turning.

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
    • Kick the tire to loosen the wheel, if necessary
  2. step : Removing the Axle Shaft (1:36)
    • Straighten the axle nut dimple with a hammer and a punch
    • Have an assistant press the brake pedal
    • Remove the 36mm hub nut
    • Remove the cotter pin from the ball joint nut with a pick and needle nose pliers
    • Remove the 17mm nut from the ball joint
    • Thread the 17mm nut partially on
    • Separate the ball joint from the steering knuckle with a pickle fork and a hammer
    • Remove the 17mm bolt from the ball joint
    • Pry down on the lower control arm with a pry bar
    • Pull the ball joint out of the steering knuckle
    • Push the axle out of the hub with a flat blade screwdriver
    • Push the axle away from the transmission with a pry bar and a hammer
    • Pull the axle out through the wheel well
  3. step : Installing the New Axle Shaft (4:58)
    • Push the new axle shaft into the transmission
    • Push the axle shaft into the hub
    • Push the ball joint into the steering knuckle
    • Put the 17mm nut onto the ball joint
    • Turn the nut so that the cotter pin will fit through the castle nut
    • Push the cotter pin into the ball joint nut
    • Thread on the hub nut by hand
    • Tighten the hub nut preliminarily
  4. step : Reattaching the Wheel (6:12)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 95 - 100 foot-pounds of torque in a crossing or star pattern
    • Tighten the hub nut to 180 foot-pounds

Tools needed for replacement:

    General Tools

  • Assistant
  • Center Punch
  • Floor Jack
  • Hammer
  • Jack Stands
  • Pick

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 36mm Socket

  • Specialty Tools

  • Pickle Fork

4.8 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
4
1
0
0
0
Exact fit
I purchased these due to the price, fast shipping, and the claim that they were an exact fit. They weren’t lying. These fit perfect and I wouldn’t hesitate to order from 1aauto again.
May 29, 2018
Purchased
1 month ago
Thank you for your great service , but l haven't installed these parts yet. Waiting for some vacation time to DlY.
May 14, 2018
Purchased
2 months ago
Perfect fit
Not only is the price spot on, the fit is perfect. The install video was very helpful, unfortunately, they done show the driver’s side which can be a real pain. I opted to disconnecting the strut which made the job much easier, in my opinion, to disconnecting the control arm. All in all...awesome. Thank A1
November 28, 2017
Purchased
7 months ago
Honda Odyssey CV Axle Shaft
The parts and associated video worked well for me. As a result of the success with my first order, I made two additional orders.

Thanks!
October 29, 2017
Purchased
8 months ago
04 odyssey cv axle shaft
Just replaced this weekend so not a lot of miles on the new ones. The replacements seem to be of good quality and fit just right. I would have given 5 starts if they had been on the road for a little longer. Would do it again without hesitation. The videos are great!
May 1, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2004 Honda Odyssey Pair CV Axle Shaft Outer Front
Part #: 1AACS00048

How-to Video:

(07:09 min)