Replaces
1999-03 Jeep Grand Cherokee Fog / Driving Light - 1ALFL00097
1ALFL00097This replacement fog driving light is just what you need to get your vehicle in good looking form again!
Specifications:
- Fits RH (Passenger Side)
- Mounts in the bumper
- Clear Lens
- Injection molded plastic
- DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
- Direct replacement fog light
- Fog light does not include bulbs or wiring
This fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.
Direct Fit Replacement
Direct fit replacement for OEM assembly
Trouble-free InstallationLight uses same wiring as the original assembly, providing easy, trouble-free installation. No cutting or splicing required.
DOT and SAE CompliantDOT & SAE compliant: meets federal regulations for on-road use
Lifetime Warranty
This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
Bulb Note:
Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.
-
step : Remove the fog lights (1:45)
- Under the vehicle, there are two 10 mm bolts.
- Hit them with penetrating oil and give it a few minutes to work its magic, especially if it’s a rust belt car.
- Remove the bolts with your wrench or 10 mm socket and ratchet.
- Unplug the wiring harness.
- Change the bulbs or swap the bulbs into a new assembly.
-
step : Install the new fog light (3:44)
- Remove the old studs with a pair of vise grip pliers and a wrench.
- Use the vise grip again to take the nut from the old bolt to use on the new one.
- Plug in the wiring harness and bolt the new fog light assembly in.
- Use your 10 mm socket and ratchet.
Tools needed for replacement:
- Sawzall
- Vise Grip Pliers
- Ratchet
- 10mm Socket
General Tools
Pliers, Cutters & misc Wrenches
Ratchets & Related
Sockets - Metric
Vehicle Fit
- 1999-2003 Jeep Grand Cherokee Clear Fog / Driving Light Passenger Side
This part replaces:
- Partslink CH2593111
- Hollander 116-01126
- OE # 55155136
- TYC 19-5377-01
- DEPO 333-2008R-AS