Replaces

1999-03 Jeep Grand Cherokee Fog / Driving Light - 1ALFL00094

Part Details

  • Light Option: Tinted Lens

This replacement fog driving light is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits LH (Driver Side)
    • Mounts in the bumper
  • Replaces dealer part number: 55155137AC
  • Tinted (Smoked) Lens
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog light
  • Fog light does not include bulbs or wiring

This fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Remove the fog lights (1:45)
    • Under the vehicle, there are two 10 mm bolts.
    • Hit them with penetrating oil and give it a few minutes to work its magic, especially if it’s a rust belt car.
    • Remove the bolts with your wrench or 10 mm socket and ratchet.
    • Unplug the wiring harness.
    • Change the bulbs or swap the bulbs into a new assembly.
  2. step : Install the new fog light (3:44)
    • Remove the old studs with a pair of vise grip pliers and a wrench.
    • Use the vise grip again to take the nut from the old bolt to use on the new one.
    • Plug in the wiring harness and bolt the new fog light assembly in.
    • Use your 10 mm socket and ratchet.

Tools needed for replacement:

    General Tools

  • Sawzall

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Need wire kit new install?
Ronald W on Jan 12, 2018
BEST ANSWER: Thanks for the question! These are not meant to add fog lights to the vehicle, but to replace fog lights that came on the vehicle from the factory. Thanks!

Vehicle Fit

Year Make Model Description
1999-2003Jeep Grand Cherokee Jeep Grand Cherokee Tinted Lens Fog / Driving Light Driver Side

This part replaces:

  • Partslink CH2592125
  • Hollander 116-01127
  • DEPO 333-2008L-ASN
  • OE # 55155137AC
Only 3 left in stock
Part #: 1ALFL00094


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:44 min)