Specifications:

  • Brand New Lighting Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Preliminary Notes (0:47)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
    • When adjusting headlights, the concentration of the beam should be an inch below the height of the low beams at a 20ft distance and the high beams should be level with the height of the high beams at a 20ft distance.
  2. step : To replace just the headlight bulbs (0:50)
    • Pop the hood and secure it.
    • Reach behind the headlight assembly.
    • Unplug the harness and pull aside the rubber boot.
  3. step : Remove the grille (2:10)
    • Use a flat blade screwdriver to unclip
    • Pull off and set aside
  4. step : Remove the parking light (3:45)
    • Unscrew the phillip's screw at the top
    • Pry out the parking light
    • Unplug the wiring assembly and bulbs
  5. step : Remove the headlight assembly (4:20)
    • Remove the 10mm bolts securing the assembly.
    • Remove the four fasteners.
    • Remove the 10 mm nuts using your wrench.
    • Pull out the headlight assembly and unplug.
  6. step : Install the new headlight (5:20)
    • Plug in the wiring harness and bulbs
    • Bolt the headlight assembly in and replace all the clips.
  7. step : Install the parking light (6:40)
    • Plug in the bulbs and harness
    • Secure the parking light into place with your Phillips screw and driver
    • 7:09 Install the grille
    • Transfer the grille clips from the old head light assembly to the new one.
    • Clip the grille on.
  8. step : Aim the headlights (8:30)
    • Use your Phillips screwdriver to adjust the adjustor screws and aim the headlights.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:27 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket



This part replaces:

  • TYC 20-5652-00
  • TYC 20-5651-00
  • TYC 18-5652-00
  • TYC 18-5651-00
  • Hollander 114-58593L
  • Hollander 114-58593R
  • OE # 81150-35300
  • OE # 81110-35320
  • OE # 81610-35330
  • OE # 81620-35340
  • Partslink TO2502128
  • Partslink TO2503128
  • Partslink TO2521157
  • Partslink TO2520157

Vehicle Fit

  • 1999-2002 Toyota 4Runner 4 Piece Set Lighting Kit
Part #: 1ALHT00132

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More