Replaces

1999-02 Toyota 4Runner Headlight Pair - 1ALHP00134

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

Specifications

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Plastic lenses
  • Includes lenses, housings, and mounting panels
  • Replaces dealer part numbers: 81150-35300, 8115035300, 81110-35320, 8111035320
  • Bulbs not included
This replacement headlight pair is a great replacement and has good cost savings over head lights from the dealer.
Fit guaranteed
  • This pair of headlamps will install just as your originals do. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight set should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing discolored, scratched, dull or damaged headlights with a new pair from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new pair of headlights can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new pair of headlights from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Preliminary Notes (0:47)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
    • When adjusting headlights, the concentration of the beam should be an inch below the height of the low beams at a 20ft distance and the high beams should be level with the height of the high beams at a 20ft distance.
  2. step : To replace just the headlight bulbs (0:50)
    • Pop the hood and secure it.
    • Reach behind the headlight assembly.
    • Unplug the harness and pull aside the rubber boot.
  3. step : Remove the grille (2:10)
    • Use a flat blade screwdriver to unclip
    • Pull off and set aside
  4. step : Remove the parking light (3:45)
    • Unscrew the phillip's screw at the top
    • Pry out the parking light
    • Unplug the wiring assembly and bulbs
  5. step : Remove the headlight assembly (4:20)
    • Remove the 10mm bolts securing the assembly.
    • Remove the four fasteners.
    • Remove the 10 mm nuts using your wrench.
    • Pull out the headlight assembly and unplug.
  6. step : Install the new headlight (5:20)
    • Plug in the wiring harness and bulbs
    • Bolt the headlight assembly in and replace all the clips.
  7. step : Install the parking light (6:40)
    • Plug in the bulbs and harness
    • Secure the parking light into place with your Phillips screw and driver
    • 7:09 Install the grille
    • Transfer the grille clips from the old head light assembly to the new one.
    • Clip the grille on.
  8. step : Aim the headlights (8:30)
    • Use your Phillips screwdriver to adjust the adjustor screws and aim the headlights.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.67/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
0
Excellent experience
Excellent service, fast shipping, right price, parts fit just like original. I am very pleased with results. One of original headlights had a crack/small hole for years and was deteriorating on inside. Its like night and day difference with the new headlights One of the new headlights got damaged in shipping. 1A auto sent me out a replacement ASAP even over the holidays. I highly recommend 1A auto and the headlights.
January 24, 2017
Fits perfect, makes my car have a more updated look in the front.
March 30, 2018
Good product
I would highly recommend to anyone who needs headlights for there automobile, this is a great product sold at a very fair price . And l wouldnt buy them anywhere else...
November 16, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2002Toyota 4Runner Toyota 4Runner Headlight Pair
Part #: 1ALHP00134


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:27 min)