1999-01 Pontiac Grand Am Driver Side Mirror with Mounting Hardware - 1AMRK00004

This is the only replacement mirror that comes with the correct flanged mounting hardware. If your mirror was damaged then chances are your mounting bolts may have been stressed and ruined by stripping or cross threading. Also consider the goof factor, possibly loosing one of your mounting bolts in the door (it happens to the best of us). Save yourself a trip to the hardware store and make sure your mirror is on securely.

This new, aftermarket replacement mirror features:

• Driver Side
• Includes correct mounting nuts
• Manual remote operation - moves by small joystick (included)
• Twin Post design
• 100% factory inspected
• Direct replacement
• Injection molded black plastic housing
• Can be painted by the buyer to any color desired or installed as is
• Built to strict quality control standards
• Unheated
• Non folding

We have noticed that there are many inferior quality car mirrors on the market. We have researched other auto mirror manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket rear view and side mirrors available. So don't be fooled by cheaper made imitation auto mirrors. Go with superior quality!

This Pontiac Grand Am Remote Manual Mirror makes a great replacement and has substantial cost savings over a dealer auto mirror.

Special Note:

Replacement mirrors will only work for vehicles with the same exact options. If you do not have the options listed in specifications, the mirrors may not function properly.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

step : Removing the Door Panel (1:02)

• Remove the triangular trim panel and disconnect the harness.
• Remove the insulation
• Pry up the switch panel and disconnect the harnesses.
• Remove the screw in the door handle bezel.
• Remove the uncovered screws as well as one under the pull handle.
• Remove the reflector and screw behind it.
• Use a putty knife to pry out the door panel clips.
• Disconnect the harnesses from the door panel.

step : Removing the Side Mirror (2:31)

• Disconnect the mirror harness.
• Remove the three 10mm nuts that secure the side mirror.
• Pull the mirror out and off.

step : Replacing the Side Mirror (3:22)

• Feed the harness down into the door
• Replace the three 10mm nuts.
• Reconnect the mirror harness

step : Replacing the Door Panel (5:54)

• Line up the door panel and push it into place.
• Replace the screws.
• Replace the door handle bezel and the screw that secures it.
• Replace the switch panel harnesses and push the switch panel down into place.
• Replace the mirror insulation.
• Reconnect the triangular trim panel harness and push the panel back into place.