Replaces

1999-01 Honda Odyssey Steering & Suspension Kit - 1ASFK03066

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Sway Bar Links
  • Quantity: 10 Piece Set
  • Kit Includes: (2) Front Strut & Spring Assemblies
  • Kit Includes: (2) Front Inner Tie Rods

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Remove the wheel (1:02)
    • Loosen the lug nuts with a lug wrench
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  2. step : Remove the bottom of the strut (1:35)
    • Apply penetrating oil to the nuts on the bottom of the strut.
    • Use a breaker bar and penetrating oil to unbolt the 18 mm strut bolts on the bottom
    • Unclip the ABS sensor wire.
  3. step : Remove the top of the strut (4:35)
    • Pop the hood and secure it.
    • Use a flat blade screwdriver to pry up the little covers to access the 14 mm nuts.
    • Apply penetrating oil to the 14 mm nuts at the top of the strut.
    • Hold onto the strut as you remove it.
  4. step : Install the new strut (6:03)
    • Bolt the strut back in, torquing your 14 mm bolts to 30 ft lbs
    • Have someone help you guide the top of the strut into place and get the nuts started under the cover.
    • Insert your spindle to the lower end of the strut and raise your control arm until the bolt holes line up.
    • Torque the bottom 18 mm nut to 85 ft lbs
    • Make sure you don’t pinch your ABS wire and its placed correctly.
  5. step : Replace the wheel (9:40)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft lbs using a star pattern.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 18mm Socket
  • 22mm Socket
  • 19mm Socket
  • 20mm Socket

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1999-2001Honda Odyssey Honda Odyssey 10 Piece Set Steering & Suspension Kit

This part replaces:

  • Hollander 527-59546R
  • Hollander 527-59546L
  • Moog K90359
  • OE # 53540S0XA02, 53540S0XA01
  • OE # 53010S0XA01
  • OE # 06513S0XA00, 51320S0XA02
  • Monroe 171598
  • Monroe 171597
  • KYB SR4072
  • KYB SR4071
  • Moog K90349
  • Moog ES3669
  • Moog EV425
  • OE # 06513-S0X-A00, 51320S0XA02
Part #: 1ASFK03066


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:26 min)