Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:
  • Left Hand (Driver Side)
  • Includes lens, housing, and mounting panel
  • Bulbs not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Changing the Headlight Bulbs (0:45)
    • For each bulb simply twist the socket counterclockwise and pull out.
    • The harnesses can be released by pushing on the tabs and pulling.
  2. step : Removing the Headlight Assembly (1:37)
    • Remove the Phillips screw on top of the side light.
    • Twist out the socket and disconnect the other harness.
    • Loosen the grille by removing the screw closest to the light being changed.
    • Remove the clip behind the center of the grille.
    • Remove the three 10mm bolts and the 10mm nut that secure the headlight into place.
    • Pull the headlight free.
    • Disconnect the harnesses.
  3. step : Replacing the Headlight Assembly (3:12)
    • Reconnect the harnesses.
    • Line the headlight assembly up with the body of the car and push into place.
    • Replace the three 10mm bolts and the 10mm nut.
    • Replace the screw in the grille. And replace the center clip.
    • Reconnect the sidelight, line it up and push it into place.
    • Replace the Phillips screw to secure the sidelight.
  4. step : Aiming the Headlights (6:43)
    • The outside adjuster screw: Counterclockwise is up. Clockwise is down.
    • The inside adjuster screw adjusts the light left and right.
    • Park 20’ from a wall.
    • The concentration of the low beam should be 1â€� below the bulb.
    • The concentration of the high beam should be in line with the bulb.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-1999Toyota Avalon Toyota Avalon Headlight Driver Side
Part #: 1ALHL00644


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:26 min)