Replaces

1998-99 Subaru Legacy Strut & Spring Assembly - 1ASSP00876

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Pre-assembled, loaded strut & spring assemblies allow for a quicker, safer install than replacing with just bare struts. 

Trouble-Free Install

Trouble-free install includes the matched parts needed to get the job done. New mounts, bearings, springs and hardware will provide a better ride for your vehicle and save you time from not having to do the job again because a used part failed afterwards.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
Why do this have a limited fit when the struts from a 96 legacy is the same for 98 and 99 samething for the mounts?
Jeanette L on Jan 31, 2016
BEST ANSWER: Fits can vary slightly. It may be a spring rate, diameter of the bearing plate or any changes that may have taken place from the factory.
Will this work on the legacy outback?
justin s on Jan 9, 2016
BEST ANSWER: No these will not, these are only for the Legacy. The shocks and struts we carry for the Legacy Outback for the 1998 you can see in the link below. Have a great day!

http://www.1aauto.com/1998-subaru-legacy-outback-shocks-and-struts/y-mo-c/1998-779-64

Vehicle Fit

  • 1998-1999 Subaru Legacy Rear Strut & Spring Assembly (excluding SUS Models) 4 Piece Set without ABS Brakes

This part replaces:

  • Hollander 527-59150R
  • Hollander 527-59150L
  • Hollander 527-59570R
  • Hollander 527-59571L
Part #: 1ASSP00876

Out of Stock