Replaces

1998-11 Lincoln Town Car Window Regulator Pair - 1AWRK00039

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   without Motor
  • Quantity:   Pair
  • Operation:   Power

These window regulators are just what you need to get your vehicle in good working form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Power operation
  • Replaces dealer part numbers: 1W1Z-5423209-AA, 6W1Z-5423201, 1W1Z-5423208-AA, 6W1Z-5423200, 1W1Z5423209AA, 6W1Z5423201, 1W1Z5423208AA, 6W1Z5423200
  • Do NOT include the window motors
  • Direct replacements
  • Built to strict quality control standards
These window regulators are great replacements that offers good cost savings over the dealer parts!

Please Note:  These window regulators are designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note: These window regulators are high quality aftermarket parts that meets or exceeds the performance of the original. They have been subjected to extensive testing and quality control standards. That is why we offer these regulators with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle if this window regulator does not fit the application stated.
  • This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Beginning the Repair (0:10)
    • This is Part 2 of a two part video
    • Please consult Part 1 for prior instructions
    • Perform the steps outlined in Part 1
  2. step : Reinstalling the Regulator (0:28)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the three T30 Torx screws bolts into the blower motor
    • Insert the four 10mm bolts loosely into the regulator
    • Connect the window switch wiring harness
    • Connect the window motor to the lead
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
    • Turn the vehicle on
    • Run the motor up for 4 seconds
    • Disconnect the window motor lead
    • Tighten the four 10mm bolts to the regulator
  3. step : Reinstalling the Door Panel (7:47)
    • Replace the weatherstrip
    • Connect the speaker wiring lead
    • Insert the Phillips head screws from the bottom of the door panel
    • Insert the Phillips head screws behind the door pull
    • Push in the door pull
    • Insert the Phillips head screws under the door pull
    • Connect the power window switch wiring harnesses
    • Push in the power window switch
    • Screw and replace the door lock knob

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2011Lincoln Town Car Lincoln Town Car Front Power Window Regulator without Motor Pair
Part #: 1AWRK00039

Out of Stock

How-to Video:

(09:52 min)