Replaces

1998-11 Ford Crown Victoria Lighting Kit - 1ALHT00241

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Handling the Bulbs (0:52)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : Remove the plastic cover (0:55)
    • Pop the hood and secure it.
    • Unscrew the three clips at the top.
    • Pull it up and set aside.
  3. step : Remove the headlight assembly (1:15)
    • Pull up the two tabs anchoring the headlight assembly
    • Pull out the headlight assembly
    • Unplug the wiring harness and bulbs.
  4. step : Aim headlights (3:00)
    • Preliminarily aim your headlights by matching the adjustor screws on the new headlight assembly to match the old one
  5. step : Install the new headlight assembly (3:30)
    • Plug in the bulbs and harness
    • Put the headlight assembly into place and push down the anchor tabs
  6. step : Reinstall the plastic cover (4:50)
    • Clip back in the 6 push clips

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Will these headlight assemblies fit on the P71 models of the Crown Vic?
Jason A on Mar 14, 2018
BEST ANSWER: This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit. Please feel free to call our customer service department for clarification @ 888-844-3393.

Vehicle Fit

  • 1998-2011 Ford Crown Victoria Lighting Kit Driver Side excluding Police Package

This part replaces:

  • Dorman 1590288
  • Dorman 1630302
  • TYC 20-5234-00
  • TYC 18-5096-01-1
  • Hollander 114-520L
  • Hollander 116-1045L
  • OE # YW7Z 13008 AB
  • OE # XW7Z 15A201 BB
  • Partslink FO2502146
  • Partslink FO2520147
Part #: 1ALHT00241

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(05:25 min)