Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • LH (Driver Side)
  • Includes lens, housing, and adjusting screws
  • Bulbs not included
  • Direct replacement
  • Built to strict quality control standards
This headlight is a great replacement and has good cost savings over a headlight from the dealer.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Handling the Bulbs (0:52)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : Remove the plastic cover (0:55)
    • Pop the hood and secure it.
    • Unscrew the three clips at the top.
    • Pull it up and set aside.
  3. step : Remove the headlight assembly (1:15)
    • Pull up the two tabs anchoring the headlight assembly
    • Pull out the headlight assembly
    • Unplug the wiring harness and bulbs.
  4. step : Aim headlights (3:00)
    • Preliminarily aim your headlights by matching the adjustor screws on the new headlight assembly to match the old one
  5. step : Install the new headlight assembly (3:30)
    • Plug in the bulbs and harness
    • Put the headlight assembly into place and push down the anchor tabs
  6. step : Reinstall the plastic cover (4:50)
    • Clip back in the 6 push clips

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2011Ford Crown Victoria Ford Crown Victoria (excluding Police Package) Headlight Driver Side
Part #: 1ALHL00389


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:25 min)