Replaces

1998-10 Volkswagen Beetle Power Window Switch - 1AWES00187

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Color:   Satin Black

Specifications:

  • Fits LH (Driver Side) FRONT
  • 1 Button Switch
  • Direct replacement
  • Built to strict quality control standards

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:36)
    • Pry off panel on the pull handle
    • Remove the Phillips screws from the pull handle
    • Remove three T20 Torx bolts at the bottom of the door panel
    • Pull out on the panel around the edges
    • Pull the top of the panel forward out of the track
  2. step : Disconnecting the Door Panel (1:51)
    • Disconnect the door lock wiring harness
    • Disconnect the window switch wiring harnesses
    • Disconnect the mirror switch wiring harness
    • Disconnect the trunk switch wiring harness
    • Unhook the door handle cable by pulling it out of the bracket
    • Disconnect the harness for the door lock by pulling out
    • Pry the lower harnesses free with a flat blade screwdriver
    • Disconnect the harness for the courtesy light by pushing the tab
  3. step : Servicing the Power Window Switch (2:49)
    • Flip over the door panel
    • Pry either side of the window switch with a flat blade screwdriver and pull up till it's free
    • Push the window switch down into place
  4. step : Reinstalling the Door Panel (3:10)
    • Connect the door lock wiring harness
    • Connect the mirror switch wiring harness
    • Connect the window switch wiring harnesses
    • Connect the trunk switch wiring harness
    • Re-clip the door handle cable by pushing it into the bracket
    • Reconnect the courtesy light
    • Place the door panel back into the track and push down
    • Hit in the clips around the edges of the door panel
    • Replace three T20 Torx bolts at the bottom of the door panel
    • Replace the Phillips screws to the pull handle
    • Clip the door panel into place

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do they make a dual window switch to replace drivers side? or do I have to purchase them separate?
David M June 5, 2016
You will need to buy 2 separate switches.
Monte Y June 5, 2016
The switches are individual switches and purchased separately.
Tracy C June 5, 2016
Im not sure. I just replaced the one.
Margaret S June 6, 2016
David, We purchased only the individual switch because that is all we needed. Our car did not originally have a dual switch. Sorry I couldnt be more help. Good Luck
Felita G June 6, 2016
Single switches only
Brian F June 6, 2016
Year Make Model Description
1998-2010Volkswagen Beetle VW Beetle Front Satin Black Power Window Switch Driver Side
Only 3 left in stock
Part #: 1AWES00187


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:38 min)